<![CDATA[Running Isadora from Qlab]]>Hello,

I'd like to use one mbp for a show where I use Qlab to run Isadora using perhaps the solution described here below. I wonder if anyone's done this, I'm having a spot of trouble with it. The show's not very demanding video-wise, and I've only got one operator. I've got a 2.2Ghz Quad core with 16 GB RAM and 1024 MB VRAM, with an SSD. 
My first problem is I can't keep the MIDI in monitor status window alive while I switch to Qlab to test the connectivity between Qlab and Isadora. It disappears when I click on the Qlab UI, so I can't really tell if MIDI is getting from Qlab to Isadora. The second problem is that it jumps several scenes. Any thoughts?
Also I wonder if it's better to use OSC. Anyone have any experience with that?
Much obliged,
Alex Williams
Sound and Video Designer
Toronto, Canada
http://www.youtube.com/watch?v=h5QRwAk97qQ&ytsession=9uEaIlH-5UYZe2QeclLXGgTHpRFgu0KM3ngQWpD2Ev-IFRmavzDXejoPXxdqBVqP0ALsA22YXYCGLh0ZcdB_9uR8FcLgndS9imHQyvvYYbZj-arfUiHBUEwPD5WXj6OdKRCecSZQuSDY5UdnWEd6zkEgw01C4NNKdpcbtdG5LePFdPMD49vhpzpMx4rCFUdzL0rWsUcutx1Ds2mouZtCFrKqQrth55w_-b-rUlAXD4dtnjITvVuxGm6myfbXiW6-iH2ohJBhqgoR-NH-bS9FpkZVgba1yV9KleejB4AL8czutDjnk9ceTSfwwRQ1g-68eXktx2C_8FCW3Ozsp-bKc1W9wk-cb0lcFw75aagHtE0QIsL2xm0esB71Na6wcEz3gVPshCNDXiyxRe5NsGpKoS7e49ELa_YIsri2E1ygXdyhddTvoJWJiy06Kf9xr16V-4g_dl9bnoB9J6y2xkXdQ6gNwWV3ncW5RxjVPAIRJ9uE5RFL3QRDqWnEjkERBaswJQPSNtKa7J2_Wvovq3y1zcO28ZU_wTLAOo1QFsl34do7dKoexjXW8G_hQ7q-466qCu8lXUZjEALpyPzfWhBsqs1SNVSzjph8IpllgRqDp1QU7IQdHTK3QA
]]>https://community.troikatronix.com/topic/277/running-isadora-from-qlabRSS for NodeFri, 12 Jun 2026 11:11:40 GMTSun, 21 Oct 2012 20:44:23 GMT60<![CDATA[Reply to Running Isadora from Qlab on Sun, 28 Oct 2012 22:49:19 GMT]]>Hi Mark,

Yes, Midi's working fine with different note numbers. Couldn't figure out the reason it was jumping so far ahead, but worked around by creating a new izzy file. Decided to go another route and render out the effects to bring them into qlab to have one interface. 
Thanks,
Alex
]]>https://community.troikatronix.com/post/4593https://community.troikatronix.com/post/4593Sun, 28 Oct 2012 22:49:19 GMT<![CDATA[Reply to Running Isadora from Qlab on Fri, 26 Oct 2012 02:37:48 GMT]]>Dear Alex,

Were you able to solve your problems, with MIDI or OSC? If you still need help let me know and I'll try to post a better series of steps to get the programs communicating.
Best Wishes,
Mark
]]>https://community.troikatronix.com/post/4564https://community.troikatronix.com/post/4564Fri, 26 Oct 2012 02:37:48 GMT<![CDATA[Reply to Running Isadora from Qlab on Tue, 23 Oct 2012 12:10:50 GMT]]>Alex,

No i didn't .
But, open izzi preferences, in midi/net set  port number, put the same that you have in Qlab, close izzi, open izzi again, go to Communication--- stream setup, check auto detect input, and start triggering from qlab.. you should see OSC coming in..
Thats the basic.. but i dont know Qlab, so i don t know if there are specific problems.. 
hope it helps..
best
a
]]>https://community.troikatronix.com/post/4532https://community.troikatronix.com/post/4532Tue, 23 Oct 2012 12:10:50 GMT<![CDATA[Reply to Running Isadora from Qlab on Fri, 16 Jan 1970 15:16:23 GMT]]>Hey Deliriodelux, Thanks for the midi monitor. Still troubleshooting...

Have you used OSC to trigger Isadora from Qlab? If so, what will I need to do it?
Thanks,
Alex
]]>https://community.troikatronix.com/post/4531https://community.troikatronix.com/post/4531Fri, 16 Jan 1970 15:16:23 GMT<![CDATA[Reply to Running Isadora from Qlab on Mon, 22 Oct 2012 09:18:01 GMT]]>Hey alex,

For the first problem, try this [http://www.snoize.com/MIDIMonitor/](http://www.snoize.com/MIDIMonitor/)
The second problem is that it jumps several scenes..  that i dont understand..
OSc is very solid, but for sending triggers out of IZZi, midi should do it..
best
a
]]>https://community.troikatronix.com/post/4522https://community.troikatronix.com/post/4522Mon, 22 Oct 2012 09:18:01 GMT