<![CDATA[How can I control my ETC Express with Isadora?]]>I have been trying to set up Qlab to send Midi Show Control cues to my Express light board through a firebox, and it is being a pain in the you know what.  Is there an easy way that I am missing to run my lightboard with Isadora.  If you have any ideas that don't involve purchasing a bunch of additional hardware that would be most excellent, thanks

Justin
]]>https://community.troikatronix.com/topic/307/how-can-i-control-my-etc-express-with-isadoraRSS for NodeSat, 18 Apr 2026 22:16:45 GMTThu, 01 Nov 2012 18:47:36 GMT60<![CDATA[Reply to How can I control my ETC Express with Isadora? on Tue, 06 Nov 2012 18:56:09 GMT]]>Thanks I will try this tomorrow!!

]]>https://community.troikatronix.com/post/4759https://community.troikatronix.com/post/4759Tue, 06 Nov 2012 18:56:09 GMT<![CDATA[Reply to How can I control my ETC Express with Isadora? on Thu, 01 Nov 2012 20:04:50 GMT]]>You can do this quite easily.  Use a MIDI send control actor with the following settings:

Port: Whichever MIDI port you have set up with your device
Channel: 1
Controller: 77
Value: Whichever whole number cue you want to fire
Trigger: triggers the cue
Note that you can only trigger whole number cues.  Once you reach cue 129, set Controller to 78 and start again.
You also need to turn on MIDI in the Express.  I don't specifically remember how to do this, but it isn't that hard.
]]>https://community.troikatronix.com/post/4692https://community.troikatronix.com/post/4692Thu, 01 Nov 2012 20:04:50 GMT