<![CDATA[How to switch hdmi source on TVs without having a display menu]]>Hi there.

I'm working on a performance where we have 3 TV monitors displaying

- direct image from CCTV cameras. The camera is AHD, it runs through a DVR, and DVR gives HDMI signal in the TV.

At the same time, I'd like to switch input on the same monitor running from my PC (HDMI cable)

I have bought an HDMI switch, to stay on the same HDMI input of the TV. 

My main problem is that when I switch from one source to the other the TV DISPLAY SHOWS THE SWITCH (f.e. HDMI 3, 1080p@60HZ).

IS there a way to disable any display menu on a new TV monitor? I've got a SHARP aquos TVs. 

If not, what can I do? get a hardware video mixer? I hope this is clear enough, hope to hear your thoughts soon!

]]>https://community.troikatronix.com/topic/3261/how-to-switch-hdmi-source-on-tvs-without-having-a-display-menuRSS for NodeFri, 12 Jun 2026 09:05:35 GMTSat, 13 May 2017 17:46:22 GMT60<![CDATA[Reply to How to switch hdmi source on TVs without having a display menu on Sat, 17 Jun 2017 20:29:16 GMT]]>I solved this issue using LG Plasma TVs (specifically 50PK350) and controlling them via RS232... there was a hex code you could send to disable the OSD, and then do all the input switching over serial, but sadly can’t find the command anymore in my archives.

]]>https://community.troikatronix.com/post/24175https://community.troikatronix.com/post/24175Sat, 17 Jun 2017 20:29:16 GMT<![CDATA[Reply to How to switch hdmi source on TVs without having a display menu on Thu, 18 May 2017 19:17:46 GMT]]>Right, thanks a lot! I've redesigned the monitor set up slightly as I reached a dead end with what I was doing. CCTV camera signal and signal from computer is anyway different type. Did a workaround with putting all cameras on one monitor and now sending signal from my computer to the other ones.

@Fred I had a look at the roland v1hd, looks great, no budget for it I'm afraid.

]]>https://community.troikatronix.com/post/23706https://community.troikatronix.com/post/23706Thu, 18 May 2017 19:17:46 GMT<![CDATA[Reply to How to switch hdmi source on TVs without having a display menu on Tue, 16 May 2017 08:57:00 GMT]]>@eratatat You will need a seamless switcher, the one you have is doing exactly the same as unplugging and replugging the signal. It si pretty much impossible to find a monitor that will not notify you of a signal loss or to turn off all warnings. There are a lot of TVOne boxes that can do what you want as well as blackmagic gear. Basically you need a video mixer, there is no other way to keep the sync ramp to the screen. I think the cheapest option is the roland V1HD.

]]>https://community.troikatronix.com/post/23634https://community.troikatronix.com/post/23634Tue, 16 May 2017 08:57:00 GMT<![CDATA[Reply to How to switch hdmi source on TVs without having a display menu on Sun, 14 May 2017 21:23:20 GMT]]>turning off the display text is probably a product by product issue.. dig into the manual I guess.

Can you bring the cctv feed into isadora and do the switch in software, so that you only have the one output?

]]>https://community.troikatronix.com/post/23612https://community.troikatronix.com/post/23612Sun, 14 May 2017 21:23:20 GMT