<![CDATA[Kinect to izzy]]>Hi,

I's sorry to ask such a simple question but I'm looking for the kinect to izzy plugin that will allow izzy to recognize the camera… I searched in old post but nothing to download, it does exist do it ?
thanks
]]>https://community.troikatronix.com/topic/369/kinect-to-izzyRSS for NodeMon, 13 Apr 2026 00:10:40 GMTTue, 04 Dec 2012 04:30:32 GMT60<![CDATA[Reply to Kinect to izzy on Fri, 01 Mar 2013 22:17:13 GMT]]>Well, I did my install on 10.6.8 -- so I don't know about 10.8, and unfortunately I've got more important "fish to fry" at the moment. I refer everyone to my original post, where I said:

1) If it doesn't work, **you won't complain at all**
** **
]]>https://community.troikatronix.com/post/6266https://community.troikatronix.com/post/6266Fri, 01 Mar 2013 22:17:13 GMT<![CDATA[Reply to Kinect to izzy on Thu, 28 Feb 2013 05:20:26 GMT]]>http://troikatronix.com/troikatronixforum/discussion/download/292/Kinect Depth.izzyplug.zip

^ Copy and paste this into your browser @[Chumcw](http://troikatronix.com/troikatronixforum/profile/4750/Chumcw)
]]>https://community.troikatronix.com/post/6251https://community.troikatronix.com/post/6251Thu, 28 Feb 2013 05:20:26 GMT<![CDATA[Reply to Kinect to izzy on Sat, 23 Feb 2013 20:57:31 GMT]]>HI,

Forgot to put this in my last post:  system I am using is
MacBookPro, Mac OS 10.8.2, 2.3 GHz Intel core i7, 8GB 1333MHz, Isadora v.1.3.0f25.

]]>https://community.troikatronix.com/post/6189https://community.troikatronix.com/post/6189Sat, 23 Feb 2013 20:57:31 GMT<![CDATA[Reply to Kinect to izzy on Sat, 23 Feb 2013 20:40:58 GMT]]>Got a Kinect Sensor, downloaded and a bunch of stuff: XCode 4.6, XQuartz, MacPort, CMake, OpenNI-Bin-Dev-MacOSX-v.1.4.5.0, SensorKinect-unstable, NITE-Bin-Dev-MacOSX-v.1.5.2.21.  Followed instruction but didn't go pass "sudo port install libtool", nor Mark's "sudo rm -f /opt/local/lib/libusb-1.0.0.dylib" Got "sudo: port: command not found".  What can I do?

I see Mark's plugin icon, but nothing to download.  Help please.  THANK YOU.

]]>https://community.troikatronix.com/post/6188https://community.troikatronix.com/post/6188Sat, 23 Feb 2013 20:40:58 GMT<![CDATA[Reply to Kinect to izzy on Fri, 08 Feb 2013 16:02:51 GMT]]>I didn't read that far up the post.  I am using the QC Kinect patch and it is working fine for depth mask. I assumed the above was to get the Kineme patch working.

]]>https://community.troikatronix.com/post/6060https://community.troikatronix.com/post/6060Fri, 08 Feb 2013 16:02:51 GMT<![CDATA[Reply to Kinect to izzy on Fri, 08 Feb 2013 10:48:43 GMT]]>Dear Craig,

But did you run all the installation instructions about **libusb and OpenNI** from my post in December? You must go through this procedure for the plugin to to work.
Best Wishes,
Mark
]]>https://community.troikatronix.com/post/6056https://community.troikatronix.com/post/6056Fri, 08 Feb 2013 10:48:43 GMT<![CDATA[Reply to Kinect to izzy on Mon, 04 Feb 2013 23:52:07 GMT]]>I placed the plug in in the folder listed above.  I can't seem to find it anywhere in Izzy.  When I type search Kinect nothing comes up...

]]>https://community.troikatronix.com/post/5991https://community.troikatronix.com/post/5991Mon, 04 Feb 2013 23:52:07 GMT<![CDATA[Reply to Kinect to izzy on Mon, 04 Feb 2013 23:16:41 GMT]]>Dear Craig,

I assume you followed the instructions listed above?
Best Wishes,
Mark
]]>https://community.troikatronix.com/post/5987https://community.troikatronix.com/post/5987Mon, 04 Feb 2013 23:16:41 GMT<![CDATA[Reply to Kinect to izzy on Mon, 04 Feb 2013 14:09:37 GMT]]>I'm just wondering if anyone has Mark's Kinect Depth actor working?  I can't seem to get it to work.

]]>https://community.troikatronix.com/post/5981https://community.troikatronix.com/post/5981Mon, 04 Feb 2013 14:09:37 GMT<![CDATA[Reply to Kinect to izzy on Thu, 17 Jan 2013 05:13:57 GMT]]>@dbini
 thanks for the message and concern! I'll check out next month  (-; holliday s ;-) and keep you informed ..greetz mickey

]]>https://community.troikatronix.com/post/5708https://community.troikatronix.com/post/5708Thu, 17 Jan 2013 05:13:57 GMT<![CDATA[Reply to Kinect to izzy on Mon, 14 Jan 2013 01:09:31 GMT]]>@vanderzee worked fine for me this morning.... ?

]]>https://community.troikatronix.com/post/5645https://community.troikatronix.com/post/5645Mon, 14 Jan 2013 01:09:31 GMT<![CDATA[Reply to Kinect to izzy on Mon, 14 Jan 2013 00:56:20 GMT]]>@mickey - it should be no problem to syphon out ghost video from 2 kinects into izzy - the QC syphon watcher can be assigned to a particular syphon stream.

you can use NImate to create the ghost videos, but i think you need 2 licenses to be able to use 2 kinects.
you can combine the 2 images/videos in Isadora to create your 1280x480, so in theory it should be fine, but i've only got one kinect and therefore one NImate license so i can't check it for you.
john
]]>https://community.troikatronix.com/post/5644https://community.troikatronix.com/post/5644Mon, 14 Jan 2013 00:56:20 GMT<![CDATA[Reply to Kinect to izzy on Sun, 13 Jan 2013 06:28:29 GMT]]>I will have a look tomorrow for you.

]]>https://community.troikatronix.com/post/5636https://community.troikatronix.com/post/5636Sun, 13 Jan 2013 06:28:29 GMT<![CDATA[Reply to Kinect to izzy on Sat, 12 Jan 2013 22:14:59 GMT]]>Skulpture,

using ni mate v1.12 and izzy 1.3.0f26 and following your tutorial. the izzy stream setup will not auto detect osc values from ni mate. i had this working last March with an earlier version of izzy. any suggestions?? thx.
]]>https://community.troikatronix.com/post/5632https://community.troikatronix.com/post/5632Sat, 12 Jan 2013 22:14:59 GMT<![CDATA[Reply to Kinect to izzy on Sat, 12 Jan 2013 22:06:25 GMT]]>Kinect Depth Plugin installed in /library/application support/trokatronix/ isadora plugins. Not showing up in Isadora 1.3.0f26. 

Not complaining just feedback :-)

]]>https://community.troikatronix.com/post/5631https://community.troikatronix.com/post/5631Sat, 12 Jan 2013 22:06:25 GMT<![CDATA[Reply to Kinect to izzy on Fri, 11 Jan 2013 09:10:04 GMT]]>Two ore more kinects?

Hi out there!

Did anybody get 2 (ore even more) kinects running to isadora?
No skeltons  needed - I would like to get the "ghosts" in better resolution  (and a better/broader field of view 1280 by 480) for a panoramic backdrop scene.
Is this possible? would I need 2 pc's/ macmini's?

graceful for every hint!

cheers mickey

AND: HEY I' wish you: The very best year of all !!!

]]>https://community.troikatronix.com/post/5614https://community.troikatronix.com/post/5614Fri, 11 Jan 2013 09:10:04 GMT<![CDATA[Reply to Kinect to izzy on Tue, 11 Dec 2012 11:38:21 GMT]]>using 1.30f26 with the Kinect Depth today continually froze up isadora so i reinstalled 1.3.0f24 and it worked like a dream. not sure why but i thought id mention it.

]]>https://community.troikatronix.com/post/5343https://community.troikatronix.com/post/5343Tue, 11 Dec 2012 11:38:21 GMT<![CDATA[Reply to Kinect to izzy on Sat, 08 Dec 2012 10:12:41 GMT]]>Thanks Mark. Following your instructions above I got it running great.

]]>https://community.troikatronix.com/post/5296https://community.troikatronix.com/post/5296Sat, 08 Dec 2012 10:12:41 GMT<![CDATA[Reply to Kinect to izzy on Thu, 06 Dec 2012 21:03:28 GMT]]>P.S. Why is the dude in the tracking video dressed like a ninja?

]]>https://community.troikatronix.com/post/5279https://community.troikatronix.com/post/5279Thu, 06 Dec 2012 21:03:28 GMT<![CDATA[Reply to Kinect to izzy on Thu, 06 Dec 2012 21:01:53 GMT]]>So I'm trying to determine what packages you need to install to get this to work. Basically, the way I did it is to do a bunch of nasty and arcane unix style installs for libusb and OpenNI and others. A wonderful colleague called Andrew Sempere who is working here in Lausanne has a package that installs his Kinect app along with the required libraries and drivers using a normal installer. He offered to modify the installer to just install only the required libraries, and not his app. So I'll work with him to try to get that to happen in the next days. My suspicion is that it worked for Lanz because he had this stuff installed.

If you are really dying to use this, you can bite the bullet and install the packages required by following instructions on the page given below. But let me warn you that I have **no idea** **how to uninstall this stuff** once you've added it to your system. It shouldn't cause any trouble, but please consider that you're installing low level drivers, etc., that have the potential to cause unforeseen problems.
**INSTRUCTIONS:** http://developkinect.com/resource/mac-os-x/install-openni-nite-and-sensorkinect-mac-os-x
**NOTE 1:** You can stop before the step of installing NITE -- as this is not needed.)
**NOTE 2:** when installing libusb-devel, I had to do the following before it would work properly
sudo rm -f /opt/local/lib/libusb-1.0.0.dylib sudo port clean libusb sudo port install libusb +universal
Good luck!
Best Wishes,
Mark
]]>https://community.troikatronix.com/post/5278https://community.troikatronix.com/post/5278Thu, 06 Dec 2012 21:01:53 GMT<![CDATA[Reply to Kinect to izzy on Thu, 06 Dec 2012 15:29:34 GMT]]>Hi Folks,
Where did you get Isadora 1.30f26 ?!

Cheers
Philippe

]]>https://community.troikatronix.com/post/5273https://community.troikatronix.com/post/5273Thu, 06 Dec 2012 15:29:34 GMT<![CDATA[Reply to Kinect to izzy on Thu, 06 Dec 2012 04:35:29 GMT]]>hahaha!! Good idea!

]]>https://community.troikatronix.com/post/5253https://community.troikatronix.com/post/5253Thu, 06 Dec 2012 04:35:29 GMT<![CDATA[Reply to Kinect to izzy on Thu, 06 Dec 2012 04:34:54 GMT]]>That's fun ! let's have the phone ringing & vibrating on the kinect all the time !

]]>https://community.troikatronix.com/post/5252https://community.troikatronix.com/post/5252Thu, 06 Dec 2012 04:34:54 GMT<![CDATA[Reply to Kinect to izzy on Thu, 06 Dec 2012 02:57:23 GMT]]>Since we are talking about kinect's.... how interesting is this?

http://www.youtube.com/watch?v=CSBDY0RuhS4
]]>https://community.troikatronix.com/post/5247https://community.troikatronix.com/post/5247Thu, 06 Dec 2012 02:57:23 GMT