<![CDATA[Black Magic Intensity Pro defaulting off-line in settings]]>I'm pulling analog feed from a camcorder via an RCA cable going into the BMIP's 8-Y-in.

The BMIP input shows up in Live Capture Settings - I select Intensity NTSC/PAL and everything works until I close the  Live Capture Settings window.

When I reopen the settings the input has switched to Intensity NTSC/PAL : Intensity NTSC/PAL  offline. Selecting the above input setting when selected again works until close.

See attached pic.

Work around is to leave the settings window open.

Thoughts?

dc10f4-screen-shot-2013-02-03-at-10.36.02-am.png

]]>https://community.troikatronix.com/topic/482/black-magic-intensity-pro-defaulting-off-line-in-settingsRSS for NodeSat, 06 Jun 2026 20:13:22 GMTMon, 04 Feb 2013 10:14:50 GMT60<![CDATA[Reply to Black Magic Intensity Pro defaulting off-line in settings on Tue, 05 Feb 2013 01:54:51 GMT]]>Ok, I contacted BM about this and I cannot get a solution. Their biggest market is the US and that is how they leave it.

]]>https://community.troikatronix.com/post/6000https://community.troikatronix.com/post/6000Tue, 05 Feb 2013 01:54:51 GMT<![CDATA[Reply to Black Magic Intensity Pro defaulting off-line in settings on Tue, 05 Feb 2013 01:46:41 GMT]]>@Fred I'm using PAL but the cards keeps defaulting back to NTSC.

]]>https://community.troikatronix.com/post/5998https://community.troikatronix.com/post/5998Tue, 05 Feb 2013 01:46:41 GMT<![CDATA[Reply to Black Magic Intensity Pro defaulting off-line in settings on Tue, 05 Feb 2013 01:38:46 GMT]]>Do you use PAL or NTSC, I have a related problem that the card resets the input to PAL (as the NTSC and PAL inputs are the same virtual input). It does not happen for me when I use the HD inputs, (including using the pre-processing on the BM control panel to upconvert the SD signal to HD).

Fred
]]>https://community.troikatronix.com/post/5997https://community.troikatronix.com/post/5997Tue, 05 Feb 2013 01:38:46 GMT<![CDATA[Reply to Black Magic Intensity Pro defaulting off-line in settings on Mon, 04 Feb 2013 23:13:41 GMT]]>Please submit this as a bug report. I only have one Blackmagic card, but I'll buy another one and look into this behavior once I return to Berlin on Feb 17th.

Best Wishes,
Mark
]]>https://community.troikatronix.com/post/5986https://community.troikatronix.com/post/5986Mon, 04 Feb 2013 23:13:41 GMT<![CDATA[Reply to Black Magic Intensity Pro defaulting off-line in settings on Fri, 16 Jan 1970 17:46:40 GMT]]>OK, yeah, same error. I do cue starts and stops of the capture and that's where I'm actually losing the feed.

]]>https://community.troikatronix.com/post/5983https://community.troikatronix.com/post/5983Fri, 16 Jan 1970 17:46:40 GMT<![CDATA[Reply to Black Magic Intensity Pro defaulting off-line in settings on Mon, 04 Feb 2013 13:08:44 GMT]]>I have 2 Intensity Pros installed in a 2010 Mac Pro (izzy 1.3.of24) and exactly the same setup on a 2nd Mac Pro and have a similar situation on both although it doesn't stop the card from capturing live input. Once the cards are selected and live capture is started I close the settings window and am able to use the streams from both cards but I leave live capture running... are you start/stopping live capture from with in the patch? When I reopen the settings window it then says that card 1 is offline and I need to select it again. Interestingly the 2nd card (on both machines) doesn't suffer from going offline.

]]>https://community.troikatronix.com/post/5980https://community.troikatronix.com/post/5980Mon, 04 Feb 2013 13:08:44 GMT<![CDATA[Reply to Black Magic Intensity Pro defaulting off-line in settings on Mon, 04 Feb 2013 12:20:08 GMT]]>Ooops. I tots forgot to add crucial info:

MacPro 2009 running SL
Izzy 1.3.0f24
]]>https://community.troikatronix.com/post/5979https://community.troikatronix.com/post/5979Mon, 04 Feb 2013 12:20:08 GMT<![CDATA[Reply to Black Magic Intensity Pro defaulting off-line in settings on Mon, 04 Feb 2013 11:49:19 GMT]]>if this is on windows you most likely have a malfunctioning card or a registry error.

]]>https://community.troikatronix.com/post/5977https://community.troikatronix.com/post/5977Mon, 04 Feb 2013 11:49:19 GMT