I'll take a look asap.

I could not to attach the file here, I opened a ticket and I attached it there.

I attached a video file of mu task manager showing the CPU performance, thanks, AZ.

My OMEN is a i7 without the Optane... but it let me playback 2 1920x1080 files fine. I got it, is my hardwaree limitations, thanks!

I'm not an expert on how Isadora utilizes resources, but I see that you've got an Omen laptop. Some Omen laptops come with a Hard Disk and an Optane module - the smaller & faster Optane bit stores frequently-used files for quick access, but the rest of the data is left on the slower hard disk. So it could look as though you have plenty of disk-read-speed to spare (because the Optane module is fast), but it's actually capped at the HDD speed (which would, indeed, let you playback 1 or 2 1080p movies fine, but be an issue for 3).

It also seems odd that your task manager doesn't show the GPU performance - I've got a separate tab for that.

If the resources of the hardware are not enough, where can I see the limitation? Because in the task manager it seems that there are memory and processing power...

Regarding resolution, it maybe that your drive can't transfer the videos all at once. If you compress new versions at a lower resolution you may find that they will play smoothly for you.

Eg: going from 1920x1080 down to 1280x720 is a huge, more than 50% less data.

A 1920 video can require 40mb/s (this ranges wildly depending on codec etc) so x3 can easily be more than what a drive can handle.

Your codec should be using less than this, but may be exceeding your cpu power to decompress (h264 and similar codecs can be very cpu heavy)

Thanks by your answer. There are three different videos, and the idea is to play them only in this scene and to place a listener setted in the respective channel in the scene were I need. Then there are not another movie player. There are video in watchers, in that case it can happen, of course. I didn't use another display yet, only the main display of my notebook, whose resolution is just 1920x1080, but I don't know what resolution there are in the place where the patch will run.

I go to change the resolution to a lower one, and I tell you what happens, thanks a lot, best wishes, AZ.

I opened a new patch whith only one of the files and it plays fine, but if I put the three simultaneously the problem appears again. I use Format Factory to convert the files, but I am playing the mp4 ones. I go to convert it to HAP, I am looking for a soft to do it, thanks, best wishes, AZ.

 The fact that one of them playing at once works fine, but all three simultaneously causes choppiness leads me to believe that this might a hardware limitation; it might be that your computer can't handle playing three 1920x1080 videos simultaneously.

Thoughts:

• Is that the same video file in three different Movie Player actors? 
  • If so, you could just use one Movie Player actor and have it broadcast to all three Broadcaster channels, drastically reducing the amount of work your system needs to do.
• What is the maximum resolution that your output display is capable of?
  • If your projector/Video screen that you are displaying this content on isn't capable of/set to 1920x1080 resolution, then you're wasting processing power on the computer to play a video that's getting scaled down to the resolution of the display.
  • E.g. 
    • If your projector can only go as high as 720p, then reconvert your files to be that resolution. 
    • A lower resolution will mean less work for your computer. 
    • The higher resolution video would be scaled down to 720p anyway if that's the highest resolution of which your display is capable.
• Do you have other Movie Player actors in any of your other Scenes? (I know you only have this one Scene active, but I'm including this to benifit future forum users for whom this information might be helpful.)
  • Remember, if you've got three 1080p videos in Movie Player in the Scene "video" and three 1080p videos in Movie Players in the Scene "video izq", while you're transitioning between the Scenes both scenes are active and you're asking the computer to play six 1080p videos simultaneously for the duration of the transition.

Best wishes,

Woland

I just play the files, the three simultaneously, conected to three broadcasters in normal speed. The strings look red at times, because the streaming is intermittent. I put the optimize parameter in interactive but it had not effect. There is not any other scene active so I think that they aren't the problem.

I opened a new patch whith only one of the files and it plays fine, but if I put the three simultaneously the problem appears again. I use Format Factory to convert the files, but I am playing the mp4 ones. I go to convert it to HAP, I am looking for a soft to do it, thanks, best wishes, AZ.

You're converting it to a .mov, but it's still MPEG4 compression: really you're just re-wrapping it
You need to use an uncompressed codec, which for a Windows user would be HAP.

Do you need to play the file interactively, in other words do you need to scrub it, or play it forwards or backwards? Or are you just going to play it forwards at normal speed?
What program would you use to do the conversion to HAP? I ask because there are some things that you need to be aware of if you are using the latest versions of Adobe Premiere or Media Encoder to do this.

Great, just wanted to rule out a faulty conversion or original file.

Are you trying to just play the file through, start to finish at 1x speed, or are you "scrubbing" through it to various points, playing it backwards, or otherwise "sampling" pieces of it? Certain codecs don't like scrubbing/playing backwards/playing at more than 1x speed. If you're trying to do something interactive, try setting the Movie Player "optimize" parameter (second input from the bottom) to "Interactive" instead of "performance". See if that makes a difference. If not, try converting your original file to Apple Pro Res or HAP.

Best wishes,

Woland