<![CDATA[Best phonecam app for remote multicam ?]]>Hi, 

I'm looking for the best solution (low latency good quality and cheapest) to get 4 iPhones cams into izadora, wire or wireless, 
Few years ago, I used to stream through epoccam multicam, but @kinoni stopped development, now the app is on the store developed by "corsair component"...
Before spending much time I money, would some of you share their tries with actual multicam apps ?

thx!

]]>https://community.troikatronix.com/topic/7027/best-phonecam-app-for-remote-multicamRSS for NodeSat, 13 Jun 2026 09:45:02 GMTThu, 03 Dec 2020 19:22:55 GMT60<![CDATA[Reply to Best phonecam app for remote multicam ? on Fri, 04 Dec 2020 19:39:57 GMT]]>@bennnid

I am using TP-Link Archer C7 1300 + 450 ghz, connected to the MAc thru a Usbc ( or USB2 on another config if I remember well) to ethernet converter and the 3 iphones were set to 960/540. And yes, sometime, it loosing frames... And sometime not! I am not expecting magic from this configuration so I assume some lost, and I guess I'd use a different ( and much more expensive! ) technologie if my employer asked me for a perfect result and can afford the price of good cameras connected to quality Newtek Wifi HDMI/NDI converter, for example.

I saw Newtek updated his own phone cam and, good news, is "offering" again an Android version. I wonder if it gives better result, but sadly there is no demo version to try it, and it cost 20€...

]]>https://community.troikatronix.com/post/43895https://community.troikatronix.com/post/43895Fri, 04 Dec 2020 19:39:57 GMT<![CDATA[Reply to Best phonecam app for remote multicam ? on Fri, 04 Dec 2020 16:44:22 GMT]]>@laurentr

Hi measuring image output size, the quality speed fader goes:1920/1080,1280/720,960/540,480/270
Though with lowest resolution 480/270 on 2 iphones 5, and 1iph8, 1iph6s streaming 960/540 each,
I can get better results on 2 separate Chanels using 2,4 ghz and 5ghz...
Though it's still losing frame I don't know wether it comes from isa, iPhones or the wifi router... 

[my router DLINK GO-RT-AC750 /Wi-Fi speeds of up to 750 Mbps is connected with 10/100 fast Ethernet to computer on an Inateck gigabit ethernet usb3 hub...

Thanks for your help ! 

]]>https://community.troikatronix.com/post/43885https://community.troikatronix.com/post/43885Fri, 04 Dec 2020 16:44:22 GMT<![CDATA[Reply to Best phonecam app for remote multicam ? on Fri, 04 Dec 2020 16:43:21 GMT]]>@laurentr

I tested NDICam on 4 iPhones, via laptop network I'm loosing a few frames time to time, test with a router get smoother results... and after a day testing I had no connection loss ! when losing connection quitting the app it snaps back instantly !
I have to say the config with isa NDI 4 watcher beta (I'm on 3.0.7.) is just amazingly simple ! 

Now I'm a bit puzzled regarding the Speed/quality fader, do you know if there 's any way to set the definition sent from phones? 

Thx a lot! 

]]>https://community.troikatronix.com/post/43869https://community.troikatronix.com/post/43869Fri, 04 Dec 2020 16:43:21 GMT<![CDATA[Reply to Best phonecam app for remote multicam ? on Thu, 03 Dec 2020 21:19:51 GMT]]>My favorite for now is NDI CAM from Sienna http://www.sienna-tv.com/newsi...  , I used it intensively on several shows, it is to my point of view more reliable, cheaper and will less lag then NewTek NDIHX Cam that I was using before.  You can have as much cam as your network can handle in the same time. I tried with 3 and it work great, since you don't use the maximum HD 1920x1080 quality, or accept some delay and freeze.

NDI actor in Isadora is still in beta but works great.

]]>https://community.troikatronix.com/post/43867https://community.troikatronix.com/post/43867Thu, 03 Dec 2020 21:19:51 GMT