<![CDATA[Problems reading 2 cameras, please help]]>Hi there

I am having continuous problems getting feed from 2 cameras a once. I can read them one at a time in channel 2, but that is all.

I have a hub, where I can see them both working one after the other in the same usb input, but when I add 2, I cannot seem to get this to work.

I know many things can go wrong, so does anyone have a tip or knowledge about this. It is quite urgent. 

I am on a Mac Studio (the small model) and I have 2 Logic Pro webcams.

Any help is very appreciated.I tried activating the channel one, but I am unable to read a camera in there.

Thanks for helping:)

Eva

]]>https://community.troikatronix.com/topic/8086/problems-reading-2-cameras-please-helpRSS for NodeWed, 19 Aug 2026 09:08:52 GMTFri, 19 Aug 2022 17:43:37 GMT60<![CDATA[Reply to Problems reading 2 cameras, please help on Mon, 22 Aug 2022 17:24:56 GMT]]>@citizenjoe said:

using different inputs

 This should be the key. You can't use two cameras on the same hub (iirc)

]]>https://community.troikatronix.com/post/49713https://community.troikatronix.com/post/49713Mon, 22 Aug 2022 17:24:56 GMT<![CDATA[Reply to Problems reading 2 cameras, please help on Sat, 20 Aug 2022 23:06:24 GMT]]>@eva I wonder if you could try a USB C camera, like the Logitech Brio? I would try 2 different cameras, using different inputs.

Cheers,

Hugh

]]>https://community.troikatronix.com/post/49697https://community.troikatronix.com/post/49697Sat, 20 Aug 2022 23:06:24 GMT<![CDATA[Reply to Problems reading 2 cameras, please help on Fri, 19 Aug 2022 19:44:41 GMT]]>@citizenjoe

Hi Hugh,

Oh, I didnt know that i cannot see two if the same kind?

I can see that tey get different names. I tried connecting one through a hub, an one directly, then it is the one in the hub that can be read. I have only two inputs for usb, so I need somehow to split a signal, but I could get a usb c hub to clear both if that is the issue... 

]]>https://community.troikatronix.com/post/49687https://community.troikatronix.com/post/49687Fri, 19 Aug 2022 19:44:41 GMT<![CDATA[Reply to Problems reading 2 cameras, please help on Fri, 19 Aug 2022 18:17:09 GMT]]>I'm not a MAC person, but these would be my thoughts:

Isadora used to have a problem recognizing 2 camera's of the same type. I'm not sure if that's been addressed, but that would be my first hint.

Secondly, I vaguely remember that hubs are a bad idea. Can you try without one?

Cheers,

Hugh

]]>https://community.troikatronix.com/post/49686https://community.troikatronix.com/post/49686Fri, 19 Aug 2022 18:17:09 GMT