So I get nervous, and do the same with MIDI and it works. I don't like to not understand why it doesn't work but I have to continue my work.
Thank you very much for your time and advice :)
Have a nice day

caroline.

1.Enable the OSC check IP

2.Put an Incoming Port :8000

And: The software who send OSC to Snapshot Manager must send a "float" value equal at "1" at an adress following the format: /bankX/snapshotY

/bank1/snapshot1        0-1 (on/off) you could try OSC multitransmit and trigger 1

The fact is my patch apparently work fine on an other mac (that the software creator). He have just disable and enable the OSC in SM. But for me is not the case. So what could it be different between our two computer ? IP network, may need some changes connect to a router via air or lan and you have some IP# localhost would be your machine instead ot typing 192.1……  10.1…. firewall on/off? if there is a demo of sm let me know I could test it and check 

best…

bildtonspontan

I've tried to send different value, different adress like /bank1/snapshot1 /bank2/snapshot1 ... Not working.

For the documentation, there is not much just that:
1.Enable the OSC
2.Put an Incoming Port
And: The software who send OSC to Snapshot Manager must send a "float" value equal at "1" at an adress following the format: /bankX/snapshotY

The fact is my patch apparently work fine on an other mac (that the software creator). He have just disable and enable the OSC in SM. But for me is not the case.
So what could it be different between our two computer ?

Many thanks for your help

Oups sorry for the png.
https://dl.dropbox.com/u/18211367/Screen shot 2012-07-29 at 11.09.26.png

The Snapshot Manager is able to work with OSC, there is a small menu just for enable/disable OSC, and to put a port. (I set the port to 8000, because it doesn't work with an another port)
https://dl.dropbox.com/u/18211367/Screen shot 2012-07-29 at 11.23.00.png

Well I've checked your list, all the things seems ok for me.

I think I know the where the problem could provide:
At first I set "use type" on my OSC transmit to "ON". The transmission was ok.
Then I've tried to put it on "off", and it didn't work anymore. I've disable and enable the OSC on my Snapshot manager, and it's works again.
But the day after, it didn't work anymore.
I've send my Isadora patch and my project file snapshot manager to the creator of the software. At first it didn't work, but he put "use type" on "on", disable/enable the OSC in SM, and it's working for him. But for me, this operation doesn't do anything...

I've tried with two new project, and still don't working. I don't know what to do more...

upload to dropbox and link, could have a look at the patch png

check list:

communication midi setup?

OSC transmit actor

1 udp address localhost, or remote IP address

2 port should match with SSM OSC port

3 /osc /address   /isadora/1

may fix it

bildtonspontan

So yesterday I was happy. It worked, the transmission between Isadora and my snapshot Manager was "perfect".
But today, when I opened my patch and tested it... It didn't work. I mean the OSC transmission doesn't work anymore.
I've tried to open Isadora, Snapshot Manager, my video table in different order. I verified my number Port, and changed it, and change it again.

I join you a screenshot of my patch (I'm not sure it's the best way to do this).
Does anyone have an idea where the problem might be?

thanks :)