<![CDATA[PJ link and Epson]]>

I’m trying to control the shutter of my epson using PJ link. 

Im using an EB-PU1008B 8500LM

Trying to get PJ link to work. I have the computer talking to the projector through the web control and that works. I have pinged the projector using the port and that is successful. 

There is no password on the PJ link.

Still nothing working from the projector.

What else should I try?

]]>https://community.troikatronix.com/topic/9406/pj-link-and-epsonRSS for NodeTue, 19 May 2026 09:47:18 GMTFri, 13 Mar 2026 18:13:14 GMT60<![CDATA[Reply to PJ link and Epson on Tue, 07 Apr 2026 16:49:56 GMT]]>I like to use Companion to send commands, like shutter, to any projector. I then trigger Companion from Izzy. It makes swapping out different brands of projectors a lot easier. I also find if Companion can't control something its not meant to be controlled at all.

]]>https://community.troikatronix.com/post/57426https://community.troikatronix.com/post/57426Tue, 07 Apr 2026 16:49:56 GMT<![CDATA[Reply to PJ link and Epson on Mon, 16 Mar 2026 16:18:54 GMT]]>Hi,

On Epson projectors, you need to go into the network settings, then in the "other" section, and activate PJLink ( de-activated by default ).

The other controls are using other protocols, so will work anyway.

Best,

Mehdi

]]>https://community.troikatronix.com/post/57378https://community.troikatronix.com/post/57378Mon, 16 Mar 2026 16:18:54 GMT<![CDATA[Reply to PJ link and Epson on Sun, 15 Mar 2026 12:42:59 GMT]]>@charlotte_e

I used PJLink to control my Epson projector (I currently use another method because I find PJLink more limited). I remember that even though I didn't have a password set in the projector's menu, I needed to enter the following password in the PJLink actor: @Panasonic (I saw it on a forum).

I hope this helps.

Best

Javi

]]>https://community.troikatronix.com/post/57374https://community.troikatronix.com/post/57374Sun, 15 Mar 2026 12:42:59 GMT<![CDATA[Reply to PJ link and Epson on Fri, 13 Mar 2026 19:21:53 GMT]]>@juriaan

Yes, using PJ link actors.


ip-address 192.168.10.5

port: 4352

password: none

command: trying different ones but usually AVMT 11

connection error: 0 (undefined error 0)

]]>https://community.troikatronix.com/post/57366https://community.troikatronix.com/post/57366Fri, 13 Mar 2026 19:21:53 GMT<![CDATA[Reply to PJ link and Epson on Fri, 13 Mar 2026 19:16:30 GMT]]>Hi Charlotte, 


Are you using the PJ Link actors? Could you share your patch with us?

]]>https://community.troikatronix.com/post/57365https://community.troikatronix.com/post/57365Fri, 13 Mar 2026 19:16:30 GMT