<![CDATA[Blend Maker - Force Stage Issue]]>I'm new to the Blend Maker tool. I'm running a Mac Pro to two identical projectors. I'm not using a splitter; using the HDMI output to one projector and usbc adapter to the other projector.

I've got the setup going but when I preview Stage 3 (which combines stages 1 and 2), it doesn't send the blended image to go to the projectors. It just goes into force preview mode on my laptop screen. It I'm attaching screenshots of my Stage Setup Screen on my patch. Thank you for any help on this!

]]>https://community.troikatronix.com/topic/9413/blend-maker-force-stage-issueRSS for NodeThu, 09 Apr 2026 04:18:11 GMTThu, 09 Apr 2026 00:48:41 GMT60<![CDATA[Reply to Blend Maker - Force Stage Issue on Thu, 09 Apr 2026 01:05:50 GMT]]> If you are looking to output only the two blended images you don't need the first two stages you created. The blended stage will output to two projectors.

When you're looking at your blended stage in stage setup, you have two tabs beside the word 'stage'. In your case right now they say 4 and 5. By clicking these you can see which physical projector the stage is connected to. 

Once you remove the other two singular stages and ensure that the blended stages are being sent to the same physical projectors that those were previously connected to you should see the output you expect.

]]>https://community.troikatronix.com/post/57432https://community.troikatronix.com/post/57432Thu, 09 Apr 2026 01:05:50 GMT