Beta-testers for GStreamer plugin (OS X)

[primaldivine]

@eight
would love to try this out also :)
great work!

[eight]

@feinsinn: I don't see how double clicking on the projector could affect GStreamer -- I think that you perhaps had a buffering moment.

@primaldivine: sent you instructions.

-8

[rainbow]

@eight, cool stuff, like this and try. thx rainbow

[crystalhorizon]

Just tried with a youtube stream and worked perfect

[eight]

For those with Raspberry PI:

To use Raspberry Pi as a HTTP video source:

    On RPI execute: 

         raspivid -o - -t 0 -hf -w 640 -h 360 -fps 25|cvlc -vvv stream:///dev/stdin --sout '#standard{access=http,mux=ts,dst=:8090}' :demux=h264

    In Isadora GStreamer: set URL to

         http://RPI_HOST_IP:8090

To use Raspberry PI as RTSP video source:

    On RPI execute:

         raspivid -o - -t 9999999 |cvlc -vvv stream:///dev/stdin --sout '#rtp{sdp=rtsp://:8554/}' :demux=h264

    In Isadora GStreamer: set URL to

         rtsp://RPI_HOST_IP:8554/

To use Raspberry PI as RTSP video source with pi_streamer (https://github.com/codemonkeyricky/pi_streamer)

On RPI:

Build pi_streamer according to https://github.com/codemonkeyricky/pi_streamer

Execute pi_streamer > > /dev/null

In Isadora GStreamer: set URL to

    rtsp://RPI_HOST_IP:8554/pi_encode.h264

--8

[crystalhorizon]

I managed to take a picture as I followed the steps in this post http://www.raspberrypi.org/documentation/configuration/camera.md

So the camera is recognized by the Raspberry PI.

Tried the commands, but it says command not found see photos attached 

[eight]

It says cvlc kommando nicht gefunden. You have to install vlc player that is encoding video into rtsp.

sudo apt-get install vlc

-8

[crystalhorizon]

Ok installed the vlc player.

Now I get a full screen video feed out of the rasperry. I have connected it to my Blackmagic Intensity shuttle and routed the hdmi to my stage.

But not via Gstreamer. I dont know how to get back to the rasperry command line...

[eight]

To get back to your RPi command line press Ctrl + C (or CMND+C).

I am not sure what Blackmagic shuttle is here for.

Can you ping your RPi from the computer that runs Isadora?

--8

[gapworks]

I´d love to give it a try, sounds promising..

best

[jazzyfish]

I'd love to test it also, especially http stream from youtube

[rainbow]

@ eight

Tested the plugin.

Setup Mac mini latest OS X, iPad mini and iVigilo,

G-Streamer plugin 320x240 20 FPS

IP camera QC patch 640x480 60 FPS

thx

rainbow

[crystalhorizon]

I use the blackmagic for the display on my second monitor.

I followed that tutorial:

https://www.modmypi.com/blog/tutorial-how-to-give-your-raspberry-pi-a-static-ip-address

the next I´m trying:

http://www.dexterindustries.com/BrickPi/getting-started/using-the-pi/connect-to-your-raspberry-pi-from-a-mac/

Here I am stuck: when I execute ping gateway on rasperry pi it works and mac terminal also see screenshots. So the next step ping raspberry.local is not working

[crystalhorizon]

Ok followed that tutorial http://www.howtogeek.com/167190/how-and-why-to-assign-the-.local-domain-to-your-raspberry-pi/

I was able to ping through terminal, but VNC viewer says the host denies 

[crystalhorizon]

That one helped http://jankarres.de/2012/08/raspberry-pi-vnc-server-installieren/

So I can now use VNC Viewer on my mac

[eight]

@feinsinn -- in that case everything should work, I am assuming you are replacing RPI_HOST_IP with 192.168.0.1

--8

[crystalhorizon]

Ok to be clear:

In Raspberry Pi I put:

raspivid -o - -t 9999999 |cvlc -vvv stream:///dev/stdin --sout '#rtp{sdp=rtsp://:192.168.0.1/}' :demux=h264

And in GStreamer:

rtsp:192.168.0.1

[eight]

@fiensinn: Can't check at the moment, but I think GStreamer string should be

rtsp://192.168.0.1:8554/

--8

[Josafat]

@eight would love to try this with youtube. Than kyou very much for your time and your effort with this cool plugin.

[DusX]

Sorry I haven't been able to get into this yet..