Change multiple projector values within and across scenes
-
Your right... I need to fix the order.. so or about that, I will update it ASAP. Re- international text. This is a know limitation of isadora currently. Unicoie support is planned for a future release. Re- saving the data to file is not currently possible. I have made a request to address this, and am confident a solution will be coming. But for now that data file must be manually entered.
-
– It's so long time I ask to Mark for unicode, I hope it because it would change many thing concerning (between other) subtitling.– without saving data, it's not so interesting, but I stay tuned and I wait for a good javascript in Isadora tutorial, I will translate it in French after.Thanks a lot for your lights.I prepare a little patch with data array recording, first scene is for setting, with zero and 2 different setting recordable in separate file, scene 2 use the setting 2, scene 3 use setting 3.You can use a demo licence and still record the new settings without reporting them, easier and errorless…Hope the sample is clear.Jacques Hoepffner -
Hi all,
Firstly, thanks so much to everybody for the very helpful advice.As a theatre director that dabbles in my own projection design, my learning curve has been reallly slow. Basically every time I make a show, I learn something new about Isadora, usually in the crucible of tech, which is always fun...but I only really make a big show once a year, so... Anyway, I never taught myself how to make User Actors and, presto chango, my Isadora life is vastly improved! Thanks for pointing me in the right direction!!A lot of what you shared is beyond my abilities, to be honest, but I am now encountering what I consider a VERY STRANGE problem that i wanted to see if anybody has encountered. I rebuilt the show with new User Actors and everything is great!...but now, for some reason I cannot understand, my patch doesn't always work when I show stages...but sometimes it does...Actually, I can run the patch in Show Stages and it'll work great and then the next time I run it, it won't work at all...and then I'll disconnect from my external monitor and it shows up immediately working in Preview...and then the next time I run it in Preview it won't work and then I click Show Stages and it works there. What is happening?!I'm actually IN THE MIDDLE OF MY TOUR/RUN so this is kind of crucial to figure out asap. It's just that it doesn't appear to be an issue with the patch because it fires some of the time...and I tried it with two different computer connection setups (one Mac/DVI to ext monitor; one Mac/VGA to projector) with the same result.Can anybody give me any ideas what I can do to fix this...?Thanks in advance! -
UPDATE
The issue seems to be in a jump from one scene to the next. One scene -- a relatively straight forward patch -- will not fade. No matter what I set the count to it jumps and then it won't trigger the next scene. So I put a 1 second black scene as a pass through between the two and now the second scene will fire, but the first scene still will not fade. That makes NO sense to me. The other strange thing is that in the original scenario when the second scene doesn't get properly fired it causes all the other scenes to stop working...but if I toggle between Preview and Show Stages everything is working as normal. It feels buggy but I don't have time to remake it.Any thoughts greatly appreciated. -
The only thing I can suggest is posting the patch so we can have a look at it.
-
Thanks Skulpture,
I should have done that initially.Here is a small patch that shows the issues. Just for context...basically, I'm projecting on a house-like shape for a screen that's broken up into 8 distinct areas (at strange angles, hence the jaggedness of the projectors). Each area has a corresponding color with movies fading in and out of them.So, it starts with just color, that fades into a 1-minute scene where the colors and movies fade in one by one, and then it's meant to fade back into a third scene with all the color blocks and then text also fades in and out of each area one at a time.I just tried it again on this small patch and I'm still experience the issue that the text scene won't fire, but when I switch between Preview and Show Stages it all works. (I hope I'm being clear and that you experience the same issue and that you can help...)Any thoughts greatly appreciated.J -
Hmm well it opened and ran all the way through for me. No issues. Need to have a think and look at the patch a bit more.
-
It also is working fine for me. I know you are saying you are still using Izzy 1.0 but what version exactly did you download?
So you say that when you are in the Overture scene and the trigger delay of 56 seconds is over the Text 1 scene does not get triggered, or does it get triggered but the text is not showing?
Best Michel
-
Hm. Yeah. I was afraid of that.
I'm running 2.0.0b28I just haven't paid for the upgrade, mostly because I didn't want to do it right before working on a show in case there was some new functions that might throw me off. I'm on a rMBP i5, 8gig OSX 10.9.5.The Overture scene triggers Text 1 but then it's just a black screen until the very last title is supposed to appear and that works for some reason. But if, while that scene is running, I switch from Show Scenes to Preview it will show me that the scene is running as expected...which leads me to believe it's not a bad patch.But I'm at a loss. I'm not super panicked because I'm tricking it by running a black scene in between the two scenes. It's a little less elegant, but this isn't that elegant of a show.More to the point -- I would love to know what's going on. It's baffling me.Thanks for your help.J -
I installed version 2.0.0b28 and tested it again and I have the same problem, so please download the newest version 2.0.5 and the problem schould be gone.
Best Michel