Run a five channel video art installation triggered by Arduino with magnetic sensor

Woland

Can you send a screenshot of your Stage Setup?

gindo

unfortunately I can‘t open the file anymore and building a new one. I‘ll add a picture of the new setup (with only 4 screens).

Next issue are also my three webcams, Isadora won‘t save the settings and once I restart I have to set them up again - is that always the case or am I doing something wrong?

Woland

@gindo

Can you post both files here or in a support ticket? (There's a link in my signature.)

If you send in a ticket I can also give you the latest beta to see if any of the problems you've been experiencing have since been fixed in a beta.

gindo

Hello @woland,

Thank you very much for this support, do you mean the Isadora Document files?

If yes, I will send them in a bit!

Juriaan

@gindo

Yup! He seems the Isadora document files (.izz)

DusX

@gindo

How do you have your TripleHead2Go configured?
The resolution of 1365x1092 seems like a likely cause of issues to me here.
What resolutions do your connected displays support?
If your displays are 1920x1080, we should see the same resolution (or maybe a scale of it like 1280x720) here in Stage setup, otherwise the TripleHead2Go may not accept the feed.

gindo

Hi @dusx,

The three connected displays each support 2560 x 1440 pixel.

I add a screenshot of the Matrox setting.

I also tried to unplug the Matrox Box and open my Isadora document, but it still crashes, so I also cannot change the stage setup in Isadora.

I can open the file on another computer and I will try to rebuild it! Or does someone have another solution? I guess it's hard to tell :/

jfg

@gindo

Have you tried to start Isadora (not the document) then "Pause engine" in menu output and then open your document. If it doesn't crash make some change, save and resume engine

Best regards,

Jean-François

DusX

@gindo said:

I also tried to unplug the Matrox Box and open my Isadora document,

I would try killing the Matrox task before opening Isadora, and have the device detached. It might be the Matrox service having issue with the resolutions. But also, clear your preferences first. (see: How to Manually Delete the Isadora Preferences : TroikaTronix)

xgecemx

Hi Gina,

This sounds like an interesting interactive installation! For triggering Isadora cues from the Arduino magnetic sensor, here are a few thoughts:

Use the Arduino Firmata actor to receive the sensor data into Isadora. You'll need to initialize it and set the input pin accordingly.
Then route that input to a Switch actor to control the scene changes. For example, set it to switch to Scene 2 when the input goes HIGH (door closed).
You can use a Timer actor in each scene to transition back to Scene 1 after a set duration.
For automatic start up, you may be able to use something like a Powershell script that launches Isadora on boot up. Just need to make sure it opens in fullscreen.
For shutdown without mouse/keyboard, look into remote login software so you can SSH into the Mac and shut down calendar 2024 from another computer.

Definitely try testing the Arduino > Isadora communication first. Once you have that working reliably, the other automation should be very achievable. Let me know if you have any other questions! Excited to see how this project develops.