Hi all! I wanted to share the results of our hardware testing.

We found the problem is the Matrox Triple head to go DP on Mac MIni M4 Sequoia. No video outputs to the projector. Changing the refresch freq with no results

Positive tests:

- Matrox TripleHeadToGo Digital DP on Windows 11

- Matrox TripleHeadToGo Digital SE con Mac mini M4 Both Mac and Windows. (multiple video outputs full resolution each projector)

- DataPath Hx4 both Mac and windows

- SwitchResX both Mac and windows

I hope this info help others. And of course if anyone can figure out to solve the initial issue is welcome

@DusX @Woland 

Best,

RIL- Maxi

@woland

Hi. I have tried a few different logins and account set ups here.

I am not 100% sure what I am doing wrong tbh?

I am going to upload the file in its finished format for the time being here.

I will try again but I cannot see where I am going wrong.

Thanks as ever for all the help. I would not have go this far without it.

Eamon

countdown-timer-with-colour-final.izz

@tatrapikao said:

@thepepperpepper maybe the helppage of the actor would be a great place to document this...

 I've just logged this as a feature request for the Capture Stage to Movie and Capture Stage to Picture actors :)

@jfg

Things have happened. Mark was responding to the request for renaming inputs/outputs on the JavaScript actor, which is now a feature (there’s a comment at the top of the default code explaining how to do it).

As for my list, I’m finding that making user actors and macros is an easy enough way to name inputs and outputs. 

@juriaan

Thank you very much, every thing was resolved perfectly.

Best regards

Bruno

@dusx

good question. The Decklink Setup App doesn't give that option, but I will check as soon as I am back in my Studio (unfortunatelly not before friday).

However, I did check earlier my signal I wanted to capture and that leaves the device with 8bit.

@dusx Yes, I just did. And still nothing new... ;o(

I am looking to sell 2 Isadora USB licenses (perpetual V3 cross platform - not updated to V4). The current price for a USB V4 license is US$875.00 and the V3 to V4 upgrade is US$325.00. I am looking to get US$450.00 for each, so this purchase and upgrade to V4 is still US$100 cheaper than a V4 dongle license. I am willing to negotiate, especially if someone wants to buy both at once. I prefer a private sale, but am willing to go via Ebay (at extra cost) if you want the buyer protection.

PM for questions or offers.

@jcline-motion

The app I've used for this is either NDI HX Camera (direct NDI feed) or AirBeam Pro (Syphon via an app running on the computer)

Others that have been suggested to me but which I've never used:  TC Camera (NDI), Filmic Pro (NDI I think), EpocCam (Syphon I think), JustWifiCam,

@dbini

Here are some other ideas: openni-background-scene-2025-03-25-4.0.9.izz

Screenshot of Background Scene:

Screenshot of Receiver/Content Scene:

@jtoenjes

We've had mixed reports of the Rokoko SmartSuit Pro v2 both working and not working without gloves.

There are two variations of the Rokoko SmartSuit Pro v2, one of which has no gloves but has wrist and hand sensors as part of the sleeves, and a slightly different version with gloves where the sleeves end earlier. 

Isadora has been tested and reported as working with the Rokoko SmartSuit Pro v2 version that comes with gloves, but as far as I am aware is untested with the Rokoko SmartSuit Pro v2 version that does not have gloves.

The Rokoko SmartSuit Pro (the first version of the suit) works fine without gloves.

@bruno

Please open a support ticket if you haven't already and our Sales & Licensing team will help you get this sorted out: https://support.troikatronix.com/support/tickets/new

@smoon

It looks like your 'capture mode' input needs to be set to 'color'.

from the help file:

General: Depth Video is Sent when Capture Mode is 'Color'

If you set the 'capture mode' to color and also enable 'body tracking' or 'skeleton tracking', then the depth map will be sent to the output. To perform body or skeleton tracking, OpenNI Tracker must enable the depth sensor on your camera. In this case, it is sent to the depth video output even though the 'capture mode' says 'color'.

@skulpture

This might help if your using the stage method.

https://troikatronix.com/add-o...

@jfg

Yes that I am thinking too..

If you use tungsten pars with a red green and blue filter in front even at low intensity it will emit a lot of IR light. This shouldn't Change, but you can change all the other lights IF you filter them out of your IR camera.

@dusx Thanks! Gave it a try at 6 / 8 / and 11 — still crashing the movie players around 15 minutes into the cycle. I truly don't understand what changed. 

@reload2024 8K is going to be expensive, the controllers dont seem to have drifted down to the cheap gear yet.

Maybe 2x 4K to 1 to 4 video wall controllers will do: https://www.aliexpress.com/ite...

These are so cheap you can buy spares - there sure wont be a warranty service.

The good news is that you can now get a good video card - the NVS 810 does have a lot of outputs but only 4gb memory and it is very old tech.

@dbini said:

The little scene name buttons at the bottom of the page are all grey, and turn blue when active, pale blue when active in the background and red when using blind mode. But would it be useful to be able to change the default state colour independently? kind of like the new coloured actor titles, you could create groups of scenes just by changing the button colour. I guess the palette might need to be restricted so it doesn't interfere with the functional colour changes, but a right click - simple palette selector (a bit like the slots in Ableton) might be useful. Even a choice of 4 different greys would be nice. What do you think? 

 I'll add this to the existing feature request.

@citizenjoe

numbers 2 and 4 seem to be contradictory.