How to get precision and wireless/remote control with IzzyMap?
-
Hello,
I would opt for 3D quad distort, because you start from a geometrically accurate mesure (0,0,0,0,0,0,0,0 it's the rectangle). after that you have to play with percent, not pixels, strange way of measuring (you need to reverse some entries) but you can obtain a quite usable remote mapping.I was using that for a performance with a beamer left wing projecting right wing. I stay on stage with my iPad, touchOSC and a dedicated WiFi router, I was able to adjust the projection with pixel accuracy, touching the screen.In touchOSC I was using + and - for each of the eight parameters and in Isadora I was using Data Array to record the settings.It is very useful to do it with Osculator, making an easier way to route OSC.Jacques -
Thanks Jacques, Yes, that is the same method I have been using all these years. However, after using the Stage Setup I can see there is potential for a more integrated way to interact remotely with these Isadora features. Regards Bonemap
-
Yeah I hear you @bonemap
I guess the difference is here a lot of software/media servers use UV and texture mapping, where as Isadora is what I consider the more traditional mapping method of slicing and placing images onto a surface manually. Know what I mean?So these other softwares (and hardware - such as D3) don't really need a user to walk around a space and accurately map a structure or surfaces. -
Thanks @skulpture
You may have more experience/exposure to the latest software for architectural projection. So thanks for sharing your experience. Perhaps I should do more homework. I have found the Isadora approach a limitation considering what it takes to emulate uv point mapping. Software that matches 3d modelling and virtual space to physical objects and space is well beyond what I am doing. But then I get really excited about what Isadora might do in the space of architectural projection in terms of realtime visual compositing and responsive sensor driven interaction. I don't know of other software that can offer so much control and begin to approach architectural projection. However, it could be that I haven't looked around enough to see what alternatives are out there. Another issue has got to be the cost of commercial grade 'virtual projector' software. I guess Isadora remains in reach of the independent artist.Thanks again for your insightsBonemap -
Have you looked at the "Edge Blend Mask" and "Global Edge Blend Mask" actors.You could setup an OSC interface to these actors. This would help with the lack of line of sight for the initial projector/stage setup. -
-
We have the "recent" habit to use an app called TeamViewer on a laptop to remotely control the main computer. It works much better than remote desktop and you have full control of your isadora patch. The nicest features is that you can choose which screen you have on your remote computer, and that works really fine with "stage live edit".
No complicated osc to setup and full control of everything… I personnally find it to be the best way to do precise mapping. On the down side, you need a second computer…
Cheers
Jerome
-
@zedociel Thanks for your advice. I have used TeamViewer for operations/administration, so will check it out for this purpose as well. Reducing the amount of kit required to setup is sometimes a real bonus. I guess it depends on so many factors around what attributes a project has or is trying to achieve and how often a similar situation is repeated. I have had an ongoing annual festival commission that has a central high spec architectural projection running over 10 days, with a series of one night guerilla projection events as 'suburban satellites' produced by student teams. The one-off outdoor events are good to limit the amount of gear to set-up and down. It would be great to have a mobile/ tablet interface running on a wireless hotspot for those situations where multiple projector alignment needs to happen quickly as the sunlight fades. However, for a few days a year I am not sure if it is worth the development of a dedicated app? Cheers Bonemap
-
Hi,
I have tested the use of TeamViewer for working within the Isadora interface with a remote device. I can confirm that TeamViewer will work for this purpose. I also used an iOS install of the TeamViewer software and a hotspot generated by the iPhone 6 at a distance of around 30 mtr (not line of sight). TeamViewer MacOS and TeamViewer iOS are free for personal use. The other OS and mobile flavors are also available so I can't see why it wouldn't work for PC and Android.It is not perfect (latency and accuracy) but it appears to do the job somewhat - publishable points and calibration settings within stage set-up would still offer a way to customise the stages remotely using OSC transmissions.cheersbonemap -
I've been using TeamViewer for some things as well. Another method I've used, (not quite on the same scale as you of course), is setting up a private network with a wireless router, connecting my Mac Pro and my Macbook Pro to it, and then using the [built-in Screen Sharing](http://osxdaily.com/2012/10/10... on Macs to control my Mac Pro while wandering around with my Macbook Pro adjusting my mapping. Best wishes, Woland -
Thanks. I will look at the suite of nodes provided in Isadora : Global Keystone and Global Edge Blend Mask, and put something together with TouchOSC that I can push around with a mobile hotspot. It just means less kit to deal with for projection projects that are meant to be quick and dirty guerrilla style events.cheersbonemap -
Perhaps, a feature request, would be an official OSC api to any Global/Scene setting. I can at least see this as useful for stage setup.
