• Products
    • Isadora
    • Get It
    • ADD-ONS
    • IzzyCast
    • Get It
  • Forum
  • Help
  • Werkstatt
  • Newsletter
  • Impressum
  • Dsgvo
  • Press
  • Isadora
  • Get It
  • ADD-ONS
  • IzzyCast
  • Get It
  • Press
  • Dsgvo
  • Impressum

Navigation

    • Register
    • Login
    • Search
    • Categories
    • Recent
    • Popular
    • Tags

    Tranfert Light led (not dmx) to diffent scene with midi actor (to direct 0-24v)

    How To... ?
    2
    3
    1324
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • christophe
      christophe last edited by

      Hi ,
      I have different scene with light setting and 1 motor, how can I do a transfert from scene to scene, activat scene, jump, doesn't work with this patch (actor)
      It give 16320 step for graduat led from midi to transistor (0-24v)
      How can I do that ?
      The trick I fond is the a envellope génerator in one scene with 5 segment for 5 lighting state and the rate for the transfert but for 21 chanels I'm not sure it's yhe good solution but I have to stay in one scene .
      Alors là je bloc, I don't know
      Thanks for your help
      db017e-1er-carte-disque-9-cir.iua 0cac55-o1-rv-patch-midi-light-state.izz

      1 Reply Last reply Reply Quote 0
      • mark
        mark last edited by

        Dear Christophe,

        I think you're asking how to can crossfade from one scene to the next using this patch? Is that right?
        What exactly is not working?
        Regarding your question about 16320 steps for your controller, MIDI values only go from 0-127\. But there are some controllers that have coarse + fine values, which gives you a range of 0-16383.
        If you look at [this page](http://www.nortonmusic.com/midi_cc.html), which shows all the MIDI controllers, you'll see examples like this:
        Controller 1 = Modulation Wheel
        ...
        Controller 33 = Modulation Wheel (LSB)
        So, to send a hi resolution value, you would send two controller messages:
        0xB0 0x01 0x40 = Controller on chan 0, Mod Wheel coarse, bits 7 to 13 of 14-bit value right-justified (with high bit clear).

        0xB0 0x33 0x05 = Controller on chan 0, Mod Wheel fine, bits 0 to 6 of 14-bit value (with high bit clear).

        (0x indicates these are hexadecimal values.)
        If the device to which you are sending MIDI recognizes = these controls you can send them using the **Send HiRes Control** actor in Isadora. For the example above, you would set these inputs:
        ctl msb = 1
        ctl lsb = 33
        Then the 'value' input will accept a number from 0 to 16383, and send the two control messages in the right order.
        In any case, the solution is to use the Matrix Value Send/Receive actors, and a "Secondary Scene." (If you don't know this concept, please watch [this video tutorial](http://www.youtube.com/watch?v=wSaX-rKmWgc).)
        I have created two examples for you: an 8 bit version using standard MIDI Control Change messages, and a 16 bit version that uses the Send HiRes Control actor. To fully understand this patch, you really should open the manual and read about the Matrix Value Send and Matrix Value Receive actors. If you want more than 8 controllers, you'll need to add more. (Hopefully the examples make it clear enough how to do this.)
        Best Wishes,
        Mark

        5c3e5a-midi-matrix-value-8-bit.izz cc4741-midi-matrix-value-16-bit.izz

        Media Artist & Creator of Isadora
        Macintosh SE-30, 32 Mb RAM, MacOS 7.6, Dual Floppy Drives

        1 Reply Last reply Reply Quote 0
        • christophe
          christophe last edited by

          Dear Mark,
          Thank you verry mutch It can be the solution, i'll let you know
          Best wishes
          chris

          1 Reply Last reply Reply Quote 0
          • First post
            Last post