Automate scene changes

jhoepffner

Hello,

You can use timer/comparator/jump actors.

I send you a sample, you just need to divide the output of timer by 1000, it reads in second but the value is in millis.

Jacques

c0c7cc-timer.izz

Paz

Many thanks for the advise and example Jacques

Best wishes

Paz

Skulpture

https://www.youtube.com/watch?v=qX2YtPqeQQs

Paz

Thanks Graham - I viewed this and it was most helpful. However it only appears to offer scene progression via Keyboard Watcher and Jump actors - which I guess requires an operator to be present?

I have had a go with Jacques method above and it works!

Many thanks to both of you.

Skulpture

You're welcome.

For more advanced control you may want to look at duration:

http://www.duration.cc/

Paz

Yes of course, I think Duration would be ideal.

Cheers!

gapworks

i use enter scene trigger > trigger delay > jump works perfect

Paz

Thank you gapworks - I'll try it out.

Best wishes

Paz

gapworks your solution works a treat! Thanks again Paz

Skulpture

You can also use an envelope generator to set specific times.

Paz

Good call Skulpture - thanks to everyone for the very useful advice. Paz