Video chasing time code

[Skulpture]

Hi,

Sorry that no-one has commentated here. 

I am not sure about LTC, I know isadora can read MTC (MIDI TIME CODE) can protools output that? If so have a look at the MTC Reader actor in Isadora.

Hope this helps for now. 

[Fred]

You can use lockstep to convert ltc to MTC, it is 20 bucks. From there you can check position of the movie and sync it to MTC

[Skulpture]

https://figure53.com/lockstep/

[A Former User]

hallo.

is there a version for the win world too?
or is it another way which is only for apple users.
if someone knows a reliable mtc generator software for win, please tell us.

thx

heinrich

[Fred]

Do you need to start with ltc? You can generate mtc from most daws. There are also a lot of hardware ltc to mtc boxes like this http://pages.ebay.com/link/?nav=item.view&id=161765936478&globalID=EBAY-AU&alt=web

[craigw]

Thanks for the info.

 I tested all this a while back and I for found that the MTC Movie locker didn't run the video at full speed. The video was a little stepped and audio stopped outputting. If I take Izzy out of chase mode video looks fine and audio is present.

Still useable for non critical video. 

[craigw]

Here's the setup.

[craigw]

Also, It's not 100% chasing. If I drag LTC around the video never chases. It's more of a time code triggering start and stop.

It's still a good and useable tool, though.

[AshChristopher]

Now that the movie player can run in a time code is this the best practice for locking to time code? 

MTC Reader - Timecode Calculator - Movie Player (timecode mode/ 0 play speed)  position - Contrast Adjust - user actor with 5 projectors with several izzy mapped sections. 

I am unfortunately experiencing frequent crashes when jumping around in rehearsal 

1 movie HAP 3840x1600 - 5 projectors 

MacPro Late 2013, AMD Firepro D300 2GB, Mojave 

Isadora 3.0.6

MTC example

[barneybroomer]

@ashchristopher 

hi Cristopher (not by accident Christopher from Qlab?) What is the main timecode source? Is the frame rate the same as the video framerate? 

Cheers, Barney

[Woland]

Please open a support ticket using the link in my signature

[AshChristopher]

@barneybroomer Apologies for the delay.  I had my notifications set incorrectly.  Time code source is Midi Time Code from Qlab.  The system is disassembled now, but I believe we were matching appropriately.