Edge blending / masks

vanakaru

To post an isadora patch(like.izz) you need to save it somewhere on your computer and then attach it to your post the same way you attached the zipped pix folder. If you have many items zip it first and attach the compressed file.

eugp

Hi,

Thanks for the tips, A screenshot of how the SEB 10.8 test is used would be helpful.

Thank you,

eugp

Ah well, I get the award for Worst-Edge-Blending-Ever. Hours of trying different gradients and settings left me with about a 70% decent screen. But whenever the shot is bright there is a nasty band down the center.

The SEB actor seems unstable, I lost any reliability with what movie file was chosen as far as what was being played.

benju

I am currently also playing around with soft-edge-blending possiblities to edge-blend two projectors with Isadora. Until now, my approch was using alpha-masks/ramps, which works so far, but it's not really handy and I am also afraid of getting a nasty brighter or darker center on the overlap as I cannot control the gamma curve this way.

Are there any news about the best practice on edge blending with Isadora?

I am developping the patch on a pc, but the final project will be running on a mac. So a solution which works for pc and mac would be the best. Unfortunately this also means I cannot test the Quartz-solutions, but If this is the best/only reasonable approach, I will be able to borrow a mac from somebody for the preparations.

Victreux

Hello,

Read this old discussion... Will be great to edge-blending two projectors directly with Isadora ( and not have to tinker ). It seem to me not a creasy possibility for professional software at this day

Skulpture

**I have moved this to a more relevant section @[bagarrett74](http://troikatronix.com/troikatronixforum/profile/4954/bagarrett74)**

Hello again,

I wanted to upload the izzy file to see how I could do an edge blend with the SEB quartz composer. I didn't create the original izzy file so some of the effects are not IC or QC. The original dance performance only used 1 projector but for my performance I have other video in the show that will need to be projected with 2 projectors, edge blended. So I wanted to try and edge blend the live video to make it more interesting. I realize that I am only using a standard def signal so I would be stretching the image over the two projectors. How could I patch this so I can do an edge blend with this file?

Thanks for everyone's help. I have my system up and running and I am excited to start using it.

86d38d-magneticfieldsedge-blend.izz

Skulpture

Also; try this... It's not complete but it will get you started. @bagarrett74 ;)2f2ef5-magneticfieldsedge-blend-1.izz

bagarrett74

Thanks Skulpture. I appreciate you doing that. So with this file I should go through Blendy and Madmapper to do the edge blend. Also what do the fader actors do in this setup?
Thanks again.

Skulpture

You had "Control Watcher" actor linked to each individual projectors intensity - presumably so you could fade each in/out each output? This does the same thing in essence.

There are a few options really. Edge blend seems to be the common method for the time being.

You need to send this out via a syphon output.

PacoTheCharm

on a production in february i fell in love with Mapio - granted it was a bit of a pain to do back then since I had to do a work around to get mapio to work inside quartz (it was more a plugin than a stand alone application) so I was doing Isadora > Syphon > Quartz with Mapio output.

But mapio 2.0 lite is out and mapio 2 pro will be out soon... looks like you can just syphon right into mapio 2.0 and use that as the final output interface to do mapping/edge blending/cropping/warping in some kind of ready intuitive way. Anyways I will probably be going that route for the remount in the next few months.

http://visution.com/mapio

CitizenJoe

It can also be used as a FFGL plugin! @Mark, that's potentially very exciting for our future!

Cheers,

Hugh

lpipoz

Hello all,

SEB actor is not working for me, so I went hunting through the wide web.

I've tested Millumin, Blendy, Mapio2lite.

After that, I jumped on this thread: http://www.vidvox.net/forums/viewtopic.php?f=22&t=5863&p=21811&hilit=edge+blend#p21811

I downloaded the edgeBlend-01.qtz which is intended to work with a TripleHeadToGo, and I modified it to blend for a Dual Head to Go.

I will test it with 2 projectors tomorrow.

Attached are the QC comp.

Hope they can help.

Regards Loïc

369a34-edgeblend-01.qtz.zip 2ff725-dual-edgeblend-02.qtz.zip

Skulpture

Thanks @lpipoz :)