Video Mixer / toolset ALPHA Release
vanakaru thanks for adding the screen capture.. right now I can only guess that the Freeframe installers for mac and windows don't have the same fx. Didn't expect that, so I will investigate.[Skulpture](http://troikatronix.com/troikatronixforum/profile/6/Skulpture)[I](http://troikatronix.com/troikatronixforum/discussion/comment/1187#Comment_1187) I have some big plans for the toolset/framework (not sure what to call it yet) and I did debate releasing it .. I hope to land some paid work at some point. And I could do with donations to help with development. (a mac to work on would be the first big thing). In anycase I like building it, and enjoy adding features. If I start to get feedback from users the project will move ahead more quickly.
As for the other errors. I will borrow a friends mac, and see if I can work them out.
Please do give it a spin, even if it does seem to have Mac issues. I would appreciated information on the errors, I might be able to figure things out a little more. With some luck I can find the issue stopping it from running on f25. Right now I can load it no problem, but entering the VJ scene stalls izzy, no crash just no movement.. error on closing.
Maybe once I make a few more improvements you could use it as content for your blog.?
Any more notes, errors to report.?
I tried again. Got this error.No error with f25 but no image on output either. Clicked few places but did not go into too much. What would be the first steps to run this?BTW got FF working by reinstalling(replacing the folder) Pete's plugins. I have not used these for some time(years) so these may got corrupted somehow.
Thanks for the screen grab. Can't say I have ever seen this error before, but perhaps other Mac users can shed some light on it.
I am happy to say that for the most part the Interface looks about right (some minor font issues.).
I will write a short, "getting started" post in the next day or 2, but once it runs you basically have to select a video in the bin, then the channel number that it outputs on, and at the least set a Projector to use that channel as an input.
In this way you can route the video stream thru any of the modules. Data values work in the same sort of way. Best place to start there is with the LFOs.
Actually this runs with f25 so far OK. No errors.
So glad to hear that. Gives me hope that getting it running on windows f25 should be fairly straight forward.
I know a few modules have minor problems/inconsistencies but any reports would be much appreciated.
I hope that you have some fun with it. I also hope for a wishlist of features/modules to add. We all like to do different things. Due to the 999 limit for link Ids I will have to remove duplicate modules to allow for more variety. This will of course make for a more complete 'framework' but will impact the pre-made mixer.. I am thinking I may maintain both separately, once I am able to save the framework actors in an external library (I ran into an error that prevented this that I haven't gone back to test again yet.)
mark last edited by
Regarding the error -- it's from the Float to Integer actor. I'm a bit mystified how this can happen... it would have to be while the patch was being initialized, i.e., when you jump into the scene.Vanakaru, what version of Isadora were you using when you got this error? (You say it runs fine in 1.3.0f25, right?)Best,M
@mark yes f25 is fine but as DusX suggested f24 gives the error.
I suggested f24 because that is where I developed it (on Windows). I still have no luck running the file on f25 windows, I can open it, but can't move into the 'main' scene, it just hangs Izzy.
mark last edited by
Dear DusX,Is the patch that freezes on Windows the one included above? I'll look at it if it is -- but please file a formal bug report so I won't forget. (My show 'loopdiver' opens in Berlin next week, so my focus is not totally on Isadora at the moment.)Best Wishes,Mark
Yes Mark. The way it happens is as follows:
1. open patch.
2. scene 1 is loaded.. shows FPS etc..
3. click button to Proceed (big button)
4 hangs.. never reaches the 'Syst3m' scene.
I will add a bug report ASAP.
best of luck with your show.
Just wanted to ad that I have had a chance to test on Mac running F25, and the patch runs beautifully, other than a few small and very manageable font issues.
I have identified a few issues with initial values not loading into channel selectors, but simple selecting the required channel again will correct the problem.. and the top 'active channel' indicator strip works, so you can always peak at it.
In any case, I am happy to see it working on Mac, and plan to continue with improvements soon, including a short getting started video.