Tracking two Dancers
-
Using the ghost image from NI Mate is really handy and nice. Works perfect via syphon
-
But Im not shure if there is a ghost image in the demo of NI Mate
-
Thanks for that advice. I guess I am gonna try the kinect then.
Is there a difference (but the price) between the xbox version and the windows version?user dbini also recommended the nimate solution for smaller rooms. -
the xbox version of the kinect needs an adapter to power it and convert the signal to USB. these are pretty cheap from ebay. otherwise, its the same unit. demo of NIMate is fully functional but only works for 10 minutes and applies a watermark to any output.
-
Personally I would go for something with higher resolution than the kinect. IR tracking with a good IR camera is fast and reliable. There are a few steps to go through to get it all right and you need a capture box, an IR compatible camera (one with no IR blocking filter and preferably and IR pass-colour blocking filter. WIth IR lights and IR blockers on your incandescent lights you can have great control over the contrast. Once you get a good clean image with high contrast you can track the users easily.
I would take a look at this software as wellhttp://www.tsps.cc/You can track outside of Isadora (or on another computer) on a different thread and leave your Isadora patch to do your visuals.Isadoras tracking implementation is quite good but Isadora runs on a single thread and tracking can slow things down if you want high resolution. Kinects have a pretty low range and low resolution and still work on IR anyway so for reliability you need the same iR precautions as standard IR tracking.Kinects are also a pain to get reliable extensions for, although some active USB extensions work ok, they are not reliable enough for a show, instead I use a geffen USB over ethernet extender that costs around 250.I track IR with an HD security camera and non standard lens. The camera has full manual control and I bought an IR pass filter that slips on over the lens. It is 1920*1080 and the lens is wide, I get good results and great silhouettes when the IR lighting is arranged properly. The connection to the computer is HDSDI so it is easy to do a long run and the camera can be switched presets of RS485\. I use a cheap 150 capture box from blackmagic to get the image in. The latency is very low and the camera is reliable.Just my two cents on IR and the kinect.Fred -
@Fred thats more than two cents! First look at tsps is great: Thinking about such kind of software the last days. I have a sony camcorder with night shot function. I think Mark used one like this with IR lights at a back wall (Filters for normal theatre lights are mentioned in a forum post, maybe the old forum). Also the IR filter in front of the lens, is something I have to try out. Getting data from that IR camera for Isadora was something that was the missing link in my brain-how to get nearly similar OSC data as NI-Mate-Im not interested in so many parameters, just basic stuff. But I think what is tricky is the Z-Axis, because the kinect has "two eyes" and sees the depth, or am I wrong here?
-
@Fred, a thing or two to not forget about.
Kinects will give you (albeit noisy) mesh, not just a silhouette, which then can be used in scene flow (similar to optical flow, but in 3d).The new kinect v2 has greatly reduced the noise –– in my observations it is barely visible. -
Kinect 2 is much much better. The biggest problem is that if you want to extend the cable you need a $1500 usb3 over optical fibre system which is makes it a very expensive system. Also I have used it on a mac but it is way better on a PC. Still after that you are working with a limited range for depth anyway and no adjustable lens to correct the perspective if you need to have the camera in a particular place.
I think the kinects are pretty amazing in theory but using one in a show on tour comes with a lot of hassle.@[feinsinn](http://troikatronix.com/troikatronixforum/profile/371/feinsinn) Night shot is good but as far as I know it just removes the IR blocker but does not have a visible light block/ir pass filter.@eight what exactly do you mean by mesh? Usually this refers to an array of points describing a 3d wireframe. It is great if you can get it but as far as I can tell there is no way to get this into Isadora, maybe via OSc but I have a feeling that sending that much data every frame will choke Isadora, also it is quite a pain to deal with arrays of 3D points in izzy- and after that Isadora cannot do that much with this information.https://www.google.nl/search?q=openGL+mesh&safe=off&espv=2&biw=1745&bih=792&tbm=isch&tbo=u&source=univ&sa=X&ei=M5kaVKH2M4rQ7AaYqoGoDQ&ved=0CEkQsAQ -
I am using a $150 optical extender (50m) for kinect v2 from amazon.
I would not send the mesh to Isadora (I would not know what to do with it there), but mesh, processed into an image via a syphon, that's what I did to get something like the attachment.But the main thing I hope to get is the scene flow, which, given the reduced noise, should be easier to get, -- that's a WIP at the moment.--8 -
Ok, that is the point cloud.
Can you send a link to the 150 extender, I tested some cheap ones and they were not fast enough to get reliable performance. -
This is the one I am using: http://www.amazon.com/ADNACO-UF1-50-Active-Optical-Cable-length/dp/B00KPG41Y0/ref=pd_rhf_se_p_img_9 , although Amazon is out of them, I think I saw them somewhere else.
It took me couple of hours to figure out how to set it up, including the call to the tech support in Canada, which turned out to be very good –– they may also suggest where to buy it.The sequence of connecting things together and powering them up is critical, which is- Connect the fiber end to computer
- Connect the other fiber end to the accompanying adapter.
- Power the adapter in 2. up.
- Connect the kinect to the adapter in 2.
- Power up the kinect.
- Launch the program
- Bingo.
--8 -
hi guys, just saw the proceeding of that post. i do work with the kinect v1 at the moment. I don't know how much meters extension you need, but I am using a 10m very chep 15€ delock active usb extension and it works perfectly.
i live in berlin and i got it at cyberport if anyone is interested -
@Fred this tsps is just great!!! how could i miss it!