Using a kinnect with processing

[bruno]

Hello , I had folowed the tutorial “Isadora kinnect tracking part 2“ until step 5. But When I launched Processing 

Here is the notifications

The package “SimpleOpenNidoes not exist“

you might be missing a library

No library found for simpleOpenNi

No library found for simpleOpenNi

No library found for OscP5

No library found for netP5

No library found for codeanticodeSyphon

Librairies must be installed in a folder name librairies inside the sketchbook folder

Here is a capture of my configuration

Have you got any idee ?

Thank you

Macbook pro retina 15 inch, 2,3 ghz intelcore i7, 16 GO,isadora 2 2 2, kinnect 1414

[bonemap]

@bruno

Hi,

This doesn't answer your question directly but check out the information in this tutorial http://shiffman.net/p5/kinect/

cheers,
bonemap

[mark]

Dear @bruno 

If you followed steps 2-4 in the the Kinect Tutorial Part 2 (https://troikatronix.freshdesk...) you should not be getting these errors. Are you sure you are using the right version of Processing? As stated in step 2 of this tutorial, you must use Processing v2.2.1. You cannot use v3.

Best Wishes,
Mark

[bruno]

@bonemap

Thx you for your answering, It has helped me.

It's working....

Bruno

[bruno]

I did the protocole again and it's working, thank you very much

Best regards

Bruno