Experiences with TH2Go and complex control panels

JJHP3

I have created, and taken from others' previous patches, a VJ-style control interface with 80-odd control links. What I'd like to do is have one of these control panels for each output projector for my TH2Go. I'd have to scroll up and down to get to the correct panel for the output I'm working on, and the actor window would be huge. Is there any way around this? Can I have 3 scenes open at once and move between them? Is there any way that all the control IDs can be renumbered as I duplicate my control panel two more times? I will keep working on this - thanks for any advice!

John

JJHP3

Following up to myself...

A rehash: I have a control panels that had 90 control IDs. I trimmed it down to 30 IDs. I tried the renumber IDs command, but the ID numbers continue to range between 1 and 90.

What I can't figure out is how to renumber then so they go from 1 -> 30\. Then when I copy the panel for TH2Go projector #2 & # 3 and I can start from say 40->70 and 80-> 110 for the other panels which would help me get this done.

Another thing I still can't figure out is how to remove all IDs at once from either the edit or control window.

Thanks for any advice,

John

mark

Dear John,

To leave a gap in the control numbers as you mention isn't possible in the current version. For now, the only way would be to add some extra controls that use up those control numbers. The do your copy and paste. Then delete the extra controls.

Best Wishes,

Mark