[SOLVED] Epoccam on Windows 10
CitizenJoe last edited by Woland
Is anyone currently using Epoccam on Windows successfully? I use to have no trouble with it, but I am unable to get it to work now. It works fine in the Viewer and in CL-Eye Test (yes, I still use that!), but Isadora seems to pick up a single frame only and that's it. Please see the screenshot below.
Are there other recommendations for using the iPhone in Isadora?
Personally I would go the NDI route, so install the NDI Camera app on your iPhone, connect it to a powerfull wireless router, use the NDI to Spout plugin found online to convert the signal to something that Isadora can fetch using the Spout Receiver.
Maximortal last edited by
on win NDI is the best solution, but remember that NDIcam app is quite expensive
I haven't used epoccam.
There are Ndi camera apps.. perhaps there's one for iPhone. The NDI freeframe would let you get that easily enough.
I have used this one https://www.newtek.com/softwar...
On Android, but it's available for iPhone as well.
This one is also available http://www.sienna-tv.com/ndi/n...
@juriaan you don't need to convert ndi to spout. There is a NDI ffgl that allows you to grab it straight in.
Anyone got info on Epoccam for Mac? I usually use AirBeam Pro, but I have a user asking me questions about Epoccam on Mac.
There are 3 NDI apps I know of for iPhone:
The official one from NewTek called NewTek NDI Camera for $19.99.
One from Austria called NDICam the cheapest one $ 9.99
And the last one called JustWifiCam for $11.99, it says for free but the free version is with a watermark. At least you can test it before you purchase it.
I guess the NDI freeframe is only for Windows, for Mac you need for example NDISyphon https://docs.vidvox.net/freebi... or you can use OBS with the NDI sources and syphon inject addon.
CitizenJoe last edited by CitizenJoe
Thanks you all for your help! I will look into the NDI options.
Finally, is this is stupid question; I don't know.... How do you tell if a plugin is 64 or 32 bit (aside from when it says so on the website!)??
Seems to be. Made by the same dev as Spout.
I have emailed him personally to find the last release version (its been discontinued), but should still work fine.
CitizenJoe last edited by
I've installed the NDI FFGL plugin and these are the results:
JustWifiCan works (demo version) but is very laggy...
NDICam and New Tek NDI both show a picture, but only in moments. They each seem to capture a frame randomly every few seconds. Completely unusable. I wish these guys had demo version as I had to buy them to discover they don't work for me.
Not sure what to try next. There are minimal controls in the apps. I'm trying this on my laptop at home on my home wifi, which should be fast, at an AC level: it's the modem that Shaw (in Canada) provides for their fastest home internet. I'll set up a dedicated network next and see if that makes a difference.
Use a dedicated network and install the NDI Monitor (NDI Tools found on there website) that allows you to debug the stream, basically it allows you to view any incoming streams, that way you can figure out or it is an issue with the Network or local on your PC
I played around with the JustWifiCam (because of the demo) and used the OSB route. The computer had a wired connection to the router. I tested it in a large theatre and it worked quite well, except mixed results with the delay. The iPhone 4s worked better than an iPhone 6s. The lower the resolution the lower the delay.
CitizenJoe last edited by
I meant to get back to this sooner to post the results of my tests.
After lots of frustration with Epoccam, I went the NDI route.
I used this driver: https://resolume.com/forum/dow..., found on the Resolume forums.
After testing 3 different iPhone apps (I wish that more of them had demo versions!), I found that the NewTek NDI app to be the only one to work for me.
I had a private wireless network that I set up (AC4000 with a range extender for good measure), and I found the whole set up to be 100% reliable, good image quality (in fact WAY better than my logitech 920 or 930, which were the wired back ups for the system) and lag that I could easily deal with.
All in all, super easy to use and rock solid performance. I know that there are plans for Isadora 3 to natively support NDI, which will be even better, I expect.
Thanks for the help,