Possible crop actor bug...

bozzy

Dear Mark,

Unfortunately the resolutions I use are all over the place. Only my default resolution is 854 x 480 and I am on "scale to smallest image" mode.

cheers,

bozzy

mark

Ummm... then it will be difficult for me to reproduce the problem, because it could be related to the various resolutions. If you want me to look into this, please find a scene where the problem exists, and list the resolution of each Movie or Picture. If you give me that, I'll recreate these and see what I can find out.

That being said, I brought some pictures into your patches.

Scene 1.1 in DistractedProjector.izz works as expected -- no flickering of any kind.

Scene 4 of DistractedTVs.izz also seems fine. The Crop works as expected.

I was also running both patches at the same time (as seems to be the case in your original post) and this showed no negative effects.

However, there was a bug at one point where a movie playing at slower than normal speed would flicker when played above another image that was changing less frequently. This might explain the problem with DistractedTVs.izz, as it most definitely creates this very situation. However, I tested in 1.3.0f26 and saw no problems.

I would suggest at this point that you move to the latest pre-release (1.3.0f32 at the time of this writing) -- bugs in the 1.3.0f26 pre-release have for sure been fixed. See http://troikatronix.com/download/isadora-pre-releases/

Best Wishes,

Mark

bozzy

Let me look at the first two scenes I am having trouble with... One of the scenes: video1 is 720 X 480 and video2 is 488 X 348. A second one: video1 is 480 X 344 and video2 is 640 X 360.

cheers,

bozzy

mark

Which scenes in which file? The ones I mentioned above? Distracted Projector/Scene 1.1 has a movie and a picture, not a movie and a movie.

Best Wishes,

Mark

bozzy

Actually the bug you have described above is spot on. Because if I put several triggers around and pause the movies when they are not shown and stay below I can avoid the problem.

The scenes I was referring to were: DistractedTV's Scene2, Scene 2.1 and Scene 5.1...

Actually to move back to 0f25 might not be a bad idea if it will give the video mixers back to me but I am being extremely nervous since I am going to tech on Saturday.

Thanks for all your help Mark!

b.

bozzy

Actually you can also see the video mixer bug in DistractedProjector.izz. For example if the YUV mode is disabled Scene 2 output is all distorted. It is ok on YUV mode but then I am loosing the transparency of the .png images...

b.

mark

Dear Bozzy,

what do you mean by "all distorted" ? I've just gone in to DistractedProjector.izz / Scene 2 again, and tried to make something not work -- but it all works as expected. (I even put Scaler actors after every picture player to change with width / height to crazy values... regardless, it always works as expected.)

I've really tried hard to recreate this bug, but I simply cannot do it. Since it doesn't seem like your media files are too big, it would be great if you could WeTransfer me all the media so I can try to sort this out.

Best Wishes,

Mark

bozzy

Hey Mark,

I created a single stage patch with the same bug. It is attached...

By the way I cleaned all my patches from bugs for the show. So, I am not in a rush with this anymore but curious why I am the only one that can see this thing. :)

Thanks again for all your help.

cheers,

bozzy

b9aead-creatingbug.zip

mark

What should I see? I see three different images: the second one appears automatically, the third after I press 'n'.

Should I see flickering? or?

Best,

M

P.S. Thanks a lot for sending me the bug example -- it drives me crazy when I can't replicate a bug!

bozzy

Wow, this is getting very mysterious. :) Here is what I see...

b.

mark

Well, could be video driver related. Tell me: in the Apple System Profiler (called "System Information" on 10.8) can you "Save" a copy of the information, .zip it, and send it to mark [atta] troikatronix [dotta] com? I'd like to look over your graphics cards and drivers. Also, if you have multiple graphics cards on that computer, I'd like to know which one was active.

I am testing this on my MacBookPro i7, (which is a much later version, MacBookPro8,2). But I may have a 4,1 around that I can try.

Thanks,
Mark

bozzy

Will do... I am using a MacBook Pro (2.7 GHz Intel Core i7) (OS X 10.8.3) with no external cards. FYI...

cheers,

b.

mark

Dear All,

Bozzy and I have been collaborating on solving this problem, and it is solved -- the new version that solves the problem will be up by May 10, 2013 at the latest.

Thank you Bozzy for all your help!

Best Wishes,

Mark

bozzy

Thank you Mark..!

cheers,

bozzy