Guru Session #13: Body Tracking with Depth Cameras (Fri May 8th, 6pm CEST/5pm GMT/12pm EDT/9am PDT)

mark

EDIT: FYI The dialogue appears after relaunching Isadora when the masquerade.txt file is added at the same time as installing the plugin.

OK. That makes sense. You are breaking the code signature by doing this. I will have to make an update so that the Masquerade.txt file lives somewhere else so this won't happen. (This is probably only going to come up on Catalina because of those wonderful security features Apple gave us.)

I will put that in my to do list.

Best Wishes,
Mark

Demetri79

Well I got my Kinect V1 1414 working again on the mac pro by simply deleting the masquerade file which was inside the tracker.. I thought I tried that in the early stages of trouble shooting but saw bonemaps post about that file and it inspired me to try this one more time and boom.. it works every time now.. so .0.9.6 is working like a charm now for 2 days.

nandada

Follow up session??? I'm loving working with my Kinnect and getting a lot of cool things to happen. But for me a follow up session like the happy hour we had a few sessions ago would be golden. In the scene where you use your hands to move memes around, I have successfully combine several videos and a masked out figure but am running up against a wall when I try to substitute a video with an alpha channel for the memes. The alpha channel is transparent in AfterEffects but black in Isadora no matter how I change the settings in the movie player.

mark

@nandada said:

The alpha channel is transparent in AfterEffects but black in Isadora no matter how I change the settings in the movie player.

Can you export one or two seconds of the movie and get it to me so I can examine it? The upload limit here is 4MB so the movie cannot be bigger than that. (You'll have to .zip it anyway before you upload.)

Best Wishes,
Mark

nandada

@mark
SleepSeconds_2.mov.zip

mark

@nandada

You said:

"The alpha channel is transparent in AfterEffects but black in Isadora no matter how I change the settings in the movie player."

But the movie you uploaded is an uncompressed 10 YUV Movie -- which I found out by hovering over the movie in Isadora. My friend opened your clip in After Effects and it also said that there was no alpha channel.

You must export the movie with a codec that actually supports an alpha channel, e.g., Apple Pro Res 4444 or HapA.

Best Wishes,
Mark

nandada

Thanks Mark, I'm puzzled-the Alpha channel showed up on my end at least in AE. I've been using an older version of Premiere which doesn't have those codecs but I will try on my other computer which has Creative Cloud on it. Thank you for taking the time for this.

enibee

@nandada I'm not sure how it is possible that you see an Alpha in After Effects. Does it also show up if you import the file you posted, right click on it and choose "Interpret Footage"?

As far as I know, Uncompresssed 10-bit codec didn't support RBG+, also in the older versions of After Effects/Premiere, which means you can either get a video with only the Alpha or only the RGB channels. If you want to do that, you'll have to add in the Alpha Channel in Izzy with the "Add Alpha Channel" actor. The codec you should have is "Animation", but it will possibly produce a very large file - make sure to check "RGB+Alpha" on export. Same with the codec set to none "None(Uncompressed RGB 8-bit).. However, if you have the possibility to use ProRes or Hap, I would recommend using one of the codecs Mark suggested above.

nandada

@enibee THANKS SO MUCH!!! This answers the question. I had tried animation and picked RGB + alpha but didn't know to use add alpha channel . It's a hassle to go back and forth between my Mac show machines and my PC editing rig but I will see if HAP is a possibility on my new Premiere

mark

@nandada said:

I will see if HAP is a possibility on my new Premiere

If Isadora is installed on your PC (even the demo) it will install HAP codecs. They should appear in Premiere. Thanks @enibee for sharing your expertise. ;-)

Best Wishes,
Mark

nandada

@mark They show up in Isadora but not in Premiere. I'll try to figure out how to get them going in Premiere.

Juriaan

Hi there,

The .oni file allows you to record the movement of the OpenNI trackers inside Isadora. That way you don't have to a dancer running around the entire time. You just press record, let the dancer / person do his thing and press record again. When you enter the filename inside Isadora you can then recall that movement and keep patching.

[STAFF NOTE: This is in response to the comment below, which was originally its own thread but has been moved here]

Woland

@kdmatos said:

Hello everybody.

First of all thank you very much Mark for your excellent work. Your pedagogical qualities are also freat.

I have a question, in relation the guru 13 session:

at one point you use on the actor an .oni file in the first example, i.e. the video film dealing with the cathedral. How did you convert the movie into an .oni file? Why doing so?

Thanks in advance, Jean-Marc Matos

[STAFF NOTE: @kdmatos I moved your question and @Juriaan 's response to this thread so that all the discussion could be kept in one place.]

LucieDance

@mark Thank you for this another fantastic guru session. I am trying to locate the tutorial in the material download. I have clicked on the link you have provided but the tutorial.izzy file is not included in the download. I am on Mac Siere 10.12.6. Thank you.

mark

@luciedance said:

the tutorial.izzy file is not included in the download.

The file guru13-tracking-with-openni-tracker.izz is in the download. Isn't that the file you are looking for?

Best Wishes,
Mark

smoon

Hello, I am trying to follow this tutorial, but the link for the session materials seems to be for a different patch to what is featured - would it be possible to get a link to the patch from the tutorial? Many thanks !

smoon

@smoon I have the file titled "guru13-tracking-with-openni-tracker" but the file used at the start of the tutorial titled "Openni-tracker-tutorial" is missing

Many thanks in advance for anyone able to advise !

Woland

@smoon

Here's the OpenNI Tracker Tutorial: https://troikatronix.com/add-ons/tutorial-openni-tracker/

smoon

@woland thanks so much for the reply - so I have the Open Ni tracker and the camera set up is working fine but what I don't have is the patch which is used at the start of the tutorial, which is for a skeleton visualiser

I have the second patch used in the tutorial but not the first, which seems to be missing from the download file

many thanks in advance for any help you might be able to offer!

Woland

@smoon

The name on the file in the screenshot you are providing is "openni-tracker-tutorial.izz". The link I provided is to the OpenNI Tracker Tutorial file, not the Guru session. Please download the file I linked and tell me whether or not it is the file you were looking for: https://troikatronix.com/add-ons/tutorial-openni-tracker/