Tips on masking projectors?
Hi - I have never used masks on my projectors before this upcoming installation. The projectors I'm using have enough spill that I need to try and trim it down. I had a roll of Cinefoil lying about and have been trying that. I tape the foil directly over the projector lens.It works, but makes a very soft edge. Any experiences you might have to share about getting rid of the inherent (at least in LCD) projector spill?
Thanks! - John
CitizenJoe last edited by
The further away the mask is, the harder the line will be.
If I have to do that, I invent some sort of a rig to move the mask away from the lens. A foot or 1.5' will work better.
Wonderful advice gentlemen. Not sure in this case how to implement the distance, but I'll give it a try! Much appreciated.
Not sure in this case how to implement the distance
You could also MacGyver something with black spray-painted cardboard, blackwrap, duvetyn, tieline, zipties, coathangers, gaff tape, etc. For the distance, you could use coathangers, small diameter PVC pipe, short pieces of 1"x3", etc.
Ah gosh - you're making me feel lazy! I'll look into it and thanks for the encouragement. - John
jhoepffner last edited by
The problem, If you distance the side-arm from the lens is that you have a big reflexion of video grey on the black flag, visble by audience. When I need to mask a beamer, as for sub-titles, I use a side-arm and a cage made of cinefoil to block the diffusion from the black surface.