[ANSWERED] Creating separate stages multiple old tv monitors

[montana]

I've got 6 old television monitors with coax or rca inputs that I want to act as separate stages.  Any elegant or even inelegant ideas about how to do this? I've got a Triple Head as well as a DataPart Fx4 that I could put converters on the tv end but I'm guessing there will be problems with different monitor sizes? Though they're all old 640x480, just different sizes. Thanks!

[dbini]

the converters will do the converting for you. in my experience, HDMI to RCA converters show up as 1080p displays. the analogue output is generated by the converters, so has no influence on the communication between your graphic adapter and the converters. i haven't tried using converters with a Matrox or Datapath, but I assume there will be no problem there. You will then be able to use a combination of IzzyMap and Stage Setup to distribute your image(s) across the 6 TVs.

[Juriaan]

@montana

If you use the same type of brand of converters to convert the HDMI to RCA you should not have an issue.

[montana]

@dbini

Thanks much. It's one of those answers I began to suspect as I was formulating the question. Funny how that happens. 

[montana]

@juriaan

Got it. Thanks.