Isadora Not Projecting Properly After Upgrade
-
@ewan_fp said:
my stages
Re-reading your original post, I think this is the key here; you are working with multiple Stages. By default, Isadora 2 had 6 Stages (if I remember correctly) and that was also the maximum number of possible Stages. By default, Isadora 3 and 4 have 1 Stage, but you can add up to 15 more by clicking the little "+" button at the bottom left of Stage Setup (keyboard shortcut is Cmd+2) as well as up to 32 Virtual Stages (Stages not assigned to displays that can be used to output Syphon, NDI, Blackmagic, or for pulling content back into your patch for some advanced video workflows).
TLDR: If you're working with multiple outputs you need to add more Stages in Stage Setup.
Here's that Stage Setup tutorial again, it might make things a bit clearer: https://youtu.be/https://youtu.be/SIB31xqsxto?si=jIXG52wbcOkKpntI?si=jIXG52wbcOkKpntI
-
@juriaan I've done all of that, but here is my showfile if you want to take a look.
gad-showfile-4-february-24th-v4.0.2.izz
Please let me know if you discover anything awry.
-
@woland I actually just mistyped, I am only working with one stage at the moment, but I will check out the tutorial you linked
-
I just took a look at your file, and as you mention, you are using one stage through out. When I open Stage Setup, I can see that we have 'Stage 1' as required.
When I open the stage fullscreen or as a preview, I see the output as expected.
Are you testing with a connected display or only a projector?
You mention Isadora 4.0.2, you might want to update to the latest version. There have been updates that effect output, although this issue isn't one I have seen reported.
TROIKATRONIX : ISADORA - Get It -
@dusx I'm just using a single projector to test it. I'm using an epson ex7230 projector if that helps. I will try upgrading to the newest version to see if that does anything.
-
@juriaan said:
Output > Force Stage Preview, and make sure that Output > Show Stages works
@ewan_fp Can you confirm that you did both of these and still saw no output?
Also, please try this version of your file in which I've put a output test Scene at the beginning. I used the Show-Hide Stages actor to programatically show the Stages in case that was the issue: gad-showfile-4-february-24th-v4.0.2-l-edit.izz
-
@woland Yes, I did both of those things. I will try the new show file and get back to you.
-
@woland Still noting, though one thing that is interesting is that when I open up my file. I initially can't get my video to show up on my stage previews. I've been having to adjust the size of the preview in order to have it be visible on the preview. Could this be an indication of some sort of problem? Please let me know if you have any more ideas.
-
Have you opened a support ticket?
If not, please do. I suspect one of us will need to take a look at your machine to understand what's happening. This isn't a common issue, so it is likely specific to your system in some way. -
@dusx No, but I will do that, thank you.
