[ANSWERED] DMX actor with Isadora 4.1.3

[glacoursiere]

Hello all,

I am trying to control m’y Adj Mega Par Pofile spot with the DMX Actor, but the Actor seems to be sending and DMX string, because the display on the back of the projectif flashes.  The projector is connected with a DMX-USB working d’ongle, caus I am able to control the spot with the Qcl+ app.

So, I would need some help, to understand the problem, if someone was able to make that projector contrôlable with Isadora

Thank for any help.

[Woland]

@glacoursiere

Sounds like you're trying to control an LED Par via DMX with Isadora, but I'm a little confused by your mention of a projector.

Anyway, all you need to know is the DMX address of the LED Par, and you should be able to use this file by @DusX to control it: https://troikatronix.com/add-ons/dx-dmx-universe-enttec-compatible/

[dbini]

The Enttec DMX control actor is a little difficult to set up, but if you have the correct channels set, then it should function in the same way as a lighting desk. The times when I had a problem controlling lighting through the Enttec was fixed by experimenting with different speeds in the Serial Port setup - sometimes the default speed is too fast for the device.