Kinect + Isadora Tutorials Now Available
-
UPDATES
Have brought the Windows Processing Sketch up to date with the Mac Processing Sketch. Both now identical bar the syphon / spout bits (i.e.: Windows uses Spout, Mac uses Syphon).
Also, both sketches now output all detected skeletons via OSC to the address:/skeleton/[useridnumber]/[limbpart]I’ve updated the Mac Isadora file to reflect this in the stream setup FOR THE 1st SKELETON ONLY! I can’t do the Windows Isadora file as don’t have a windows machine handy I’m afraid (if someone wants to open up the Windows Izzy file and replicate across the OSC MultiTransmit actor and comments from the Mac file, and prefix all the OSC streams in stream setup with /skeleton/1 and attach it here, I’ll add that to the gitrepo also.)To receive multiple skeletons in Isadora, users will need to head to stream setup and add the channels for /skeleton/2/ thru to /skeleton/6/, and then duplicate the various Kinect Point actors and set their channels correctly (again, if anyone wants to do that and send me the files I’ll happily add them to the gitrepo).https://github.com/PatchworkBoy/isadora-kinect-tutorial-files -
Marci -- when I pull the izzy file (sadora Skeleton Test Mac.izz) from github it tells me that the file can't open because it was written in a later version... I have 2.1 -- what can I do? I have a mac and just got 2.1 in Nov...
-
download the file from github again... sounds like an interrupted upload, so have just reuploaded it.
-
(For reference, it was written in 2.1)
-
I also have this problem with both the Mac and Windows files, and I don't understand it. I will pm you. -
Well I haven't touched the Windows Izzy file, just downloaded and uploaded to GitHub... the Mac file works for me, and I’ve just redownloaded it from github, and that one works for me also.
Will fire it over momentarily... -
files now in hands of the Izagods!
-
@Marci --
Thank you so much for your AMAZING contributions to the Kinect project! -
No probs - all work I'd already done in Sensadora - an Open Source CC0 licensed Processing sketch specifically for getting all the various Kinect usage cases into Isadora - not finished yet. Single sketch with options for blobs, skeleton, depth thresholds, pointclouds, gestures, 2D & 3D physics engines, & multiple kinects. Also with added leap motion support - idea being to allow the obvious Minority Report display interaction with a media library of audio, video, stills and live streams, along with generic OSC, serial, & http outputs for controlling Ptz cameras (VISCA / IP / Galileo) and link to Domoticz home automation for physical control over mains sockets, inputs from contact sensors etc & other smart devices. I got sidetracked by homebridge-edomoticz development, but that's launched & support requests slowing down now so should be able to get back onto it in a week or two. S'one of those ideas that just keeps expanding! Joys of a severely autistic son who demands LOTS of sensory input! The playlist_sketch at https://www.dropbox.com/sh/lyxj60kf0k6jke7/AAAF5MszGamDSuiSP4fgH9t5a?dl=0 is the experimental playground for a lot of it.
-
So there is a issue, with downloading individual files from Github.
If you save a .izz from a link it will not open.Individual files must be downloaded from the 'view raw' option.Otherwise, downloading the ZIP package is also fine.For example, right clicking to save file as, from this link:
https://github.com/PatchworkBoy/isadora-kinect-tutorial-files/tree/master/Isadora_Kinect_Tracking_Mac
Will deliver a unuasable Isadora file.To get the same, you need to click the filename, and then 'view raw' -
Ah, yeah. Standard / by design. GitHub is a version manager / online source viewer. Not designed for pulling individual files. Download via provided Download as Zip button top right of the repo frontpage, via view as raw / open binary link on individual files, or use any git client (https://desktop.github.com) to properly clone the repo... which will then handle incremental updating etc within the client, along with ability to roll back to previous versions, switch to alternative branches (eg: master, beta, stable), allow end-users to submit proposed changes back to the repo, issue tracking etc. Any right-click > save as action will just download the JS/htm src for the file viewer at a guess (open it in notepad to verify)
-
I'm sending here an updated version of my very old Isadora Kinect Skeleton Part user actor. (for History I put it in the ni-mate forum a long time ago while I still used their public beta before the 1.0. They liked it so much that they offered me a licence of the version one when it came out).
It is essentially what Mark has done for the new tutorial files but you can see in the actor's output the actual name of the part which I find useful and there is an additional input I called osc offset. I added it because kinect might not be your ONLY Bosc input and if you have fed Izzy with another device ( like an iPad with ouch osc BEFORE you send the kinect data in... you're screwed. Kinect point actor won't work unless you change your osc input inside the actor on inside the Stream Setup window.With my actor and you just give to osc offset input the last Bosc port number you already have.The actor will automatically shift all three osc listener channels inside so you have the right value for the right body part -
ey!
great discussion here. Have the files in the tutorial been updated? -
The updated files are at https://github.com/PatchworkBoy/isadora-kinect-tutorial-files - follow the link, click the “Download Zip” button top right corner.
-
Am working my way through this on Windows 10 with a Kinect that I previously had working with the original Tutorial files.
I'm trying to run the latest, updated files, downloaded from GitHub. When I run the Processing Sketch Isadora_Kinect_Tracking_Win.pde I get an error unexpected token: = and the line
if (userList.length !== 0) {Can anyone proffer any help?
Thanks
Mark
-
Try changing
if (userList.length !== 0) {toif (userList.length != 0) { -
Thanks, Marci, yes I did try that and it gave another error further down:
Cannot find anything named kCameraInitMode
with this line highlighted:kCameraInitMode = 1; Thanks Mark -
@Marci thank you for your added ghost imageon kinect! one more question. is there a way to smooth the ghost image. as it is ,lets call it quite nervous. apart from this it works great.
But i had to delete the first couple of lines (all the ones with until "import...." because they created an error. an info that might be also useful to others here in this forum.bestps: and if i press 1 (case1) on my laptop it crashes my computer completely!! but i don´t need it so i just avoid it.
-
Opening line should begin /* If it doesn't then it'll cause errors. /* denotes start of a comment block, */ denotes end of a comment block. Looks like a case of clumsy fingers your end I'm afraid, as the files in the repo all have it correctly in place. Pressing 1 will try to init RGB mode. If sketch not launched in RGB mode then this is expected behaviour... like I said, can't switch between IR & RGB once launched. Smoothing - add a blur actor in Isadora after syphon receiver, before however you're converting it to a mask (assuming that's what you're doing)
-
@Marci thank you for the quick response. Blur in Isadora was my solution to solve the "Nervousness". I was just curious if there was an Option within Processing.
best
