​Isadora freeze on startup (Windows 10)

[DusX]

@vjw It might help if you also open a support ticket.
I will need to look for similarities between your cases, since I haven't experienced this on any of my test machines.

[arvog]

I don't know if my problem is connected to the others posted here, but maybe this helps: I tried different legacy versions of Isadora and I can start v2.0.5 without a freeze. All later versions do not work anymore. So the misbehaviour is likely due to a change that was made after v2.0.5. For me the freeze with more than one display device connected is consistent though when trying to run the current version, with and without internet connection.

[vjw]

Thanks.  I opened a support ticket.  Isadora opened when I clicked on Michel's position.trigger.izz in his reply to Kristen.  Then I could open my extant files without problem.  ??

Internet connection or not doesn't make a difference for me.

[dgaddy]

I had run into a similar problem when I installed 2.6 on a brand new machine with Windows 10 (older machine was still on 7).  After many different suggestions, including going to 2.6.1, it was settings on the graphics card.  I made sure to optimize for performance and have had no problems starting since then. 

[vjw]

@dgaddyThanks - I'll give that a try.

[arvog]

Inspired by @dgaddy 's comment I had a look into my AMD graphics driver again and found a solution that works for me so far. 

After an update of my Radeon driver from 18.3.1 to 18.3.3 one setting now solves the problem: Switching "Wait for Vertical Refresh" from the default "Off, Unless Application Specifies" to "Always Off". I think there must be a conflict in handling OpenGL.

Thanks for everyone's input in this thread, I can now go on and actually test Isadora. :)

[Pascal]

hello,

i have the same problem on my new laptop when I launch Isadora with external monitor or videoprojector on windows10 with a gtx 1060 and an intel graphic card. (displaying "Cycles 999.9 FPS 99.9").

best

Pascal

[DusX]

@pascal

Have you gone to your NVidia control panel, under 3d settings / manage 3d settings / program settings tab, and set Isadora.exe to only use the dedicated/high performance graphics card?
This setting solves problems with Spout video sharing, and may be required on laptops that have NVidia optimus or the equivalent AMD power saving feature. 

[Pascal]

@DusX .....Done and it seems to resolve the problem : Un grand merci à toi pour tes conseils et ta générosité.

Best,

Pascal

[jaimun]

@pascal said:

unch Isadora with external monitor or videoprojector on windows10 with a gtx 1060 and an intel graphic card. (displaying "Cycles 999.9 FPS 99.9").

 I am having the same problems, testing my Laptop Win10 + GTX960.

If I start Isadorra with external monitor connected, it hangs with a white screen on both monitors.

I've tried all possible solutions mentioned here, no luck.

[Woland]

@jaimun

Please use the link in my or @DusX 's signature to file a support ticket.

Best wishes,

Woland

[jaimun]

@woland

SOLVED

I had several problems with other software too, when playing video on the external HDMI output.

The problem is a process installed by MSI software: "NahimicMSISvc32.exe"

Just kill this process and Isadora opens flawlessly, opening the Stage fullscreen on the second monitor.

Thanks Ryan Webber for your advice. It was "a shot in the dark", but it worked!

Now I've rememebered I used to have a "clean.bat" batch file in my previous laptop, just for performing live with Isadora. 

So I made a new one, killing most of the unnecessary processes (for live acts).

Here it is, in case someone finds it useful:

echo on
title LIVE setup: spring cleaning
echo 
echo Live SETUP
echo
echo Killing nasty processes
echo
taskkill /f /im "Dragon Gaming Center.exe"
taskkill /f /im "NahimicMSIUILauncher.exe"
taskkill /f /im "SCM.exe"
taskkill /f /im "Silent Option.exe"
taskkill /f /im "XMouseButtonControl.exe"
taskkill /f /im "MSIService.exe"
taskkill /f /im "NahimicMSISvc64.exe"
taskkill /f /im "NahimicMSISvc32.exe"
taskkill /f /im "QMxNetworkSync.exe"
taskkill /f /im "mic_mute.exe"
taskkill /f /im "SteelSeriesEngine3.exe"
taskkill /f /im "AGSService.exe"
taskkill /f /im "ShareX.exe"
pause

I am so HAPPY !

[Maximortal]

I have this problem on my laptop every time W10 get a mayor udpate (anniversaty, creative and so on) only way found is to uninstall through DDU all video drivers and then install newest. This solve every time this bug on my laptop 

[jhoepffner]

Hello,

I just bought a windows laptop (MSI GS65 stealth with GTX1070) and I had the same problems: Isadora crashing with white screen, DaVinci resolve crashing, TouchDesigner crashing I have searched ruring 5 days and the solution of killing Nahimi is working perfectly, thanks to everibody. All is tipTop now.

Jacques

[DusX]

@jhoepffner
I had a user recently with a MSI, same problem, and same solution (he posted to the forum somewhere to document it).

[jhoepffner]

Hello,

Here is the updated batch app for killing msi nahimic (the main culprit of white screen)

echo on
title LIVE setup: spring cleaning
echo echo Live SETUP
echo
echo Killing nasty processes
echo
taskkill /f /im "NahimicService.exe"
taskkill /f /im "NahimicSvc32.exe"
taskkill /f /im "NahimicSvc64.exe"
taskkill /f /im "MSIService.exe"
taskkill /f /im "AGSService.exe"
taskkill /f /im "ShareX.exe"
pause

Hope that helps

[vjw]

It's happening again.  Isadora 2.6.1 worked fine all day and tonight won't initialize.  I get the same freeze on startup: 999.9 cycles, etc.  I don't have Nahimic, optimized my NVidia graphics months ago.  Any other solutions?

[DusX]

@vjw

If Isadora was working in the morning it is very unlikely the new problem is with Isadora.
The application folder doesn't have any thing that changes, so it could really only be something external.

Have you installed anything today?
Have you tried clearing your preference file?
Move your Freeframe, GLSL files, and Global User Actors? (so that they do not load on startup)