4 SD Inputs

keftaparty

Hi,

I would say that it can work with only one macpro, but I'm afraid a single HDD will be a bottleneck for capturing 4 simultaneous streams.

In the case of two machines the network connection will be the bottleneck ( or you go for fibrechannel but then I can't advice )

You're lucky, SSDs are getting cheaper ! You need one or two (spreading the medias ) mounted internally.

If I was you I would use the Blackmagic Disk Speed Test ( you can install and use it even if you have no blackmagic card )

It will give you direct infos about how many fps of any video size you can record on your drives.

Also don't trust theorical speeds for ssd, I am afraid the will be anyway limited by the sata2 controller of the macpro.

Best

Mehdi

simon

Thank you both very much for the advice. Mark it would be fantastic if you could test the LFG4 for me - I'll email you.

Best

Simon

mark

Dear Simon + All,

Some preliminary results for you.

Recording four channels of LFG-4 to disk:

Mac OS 10.6.8

MacPro 2 x 2.8 GHz Quad-Core Intel Xeon

RAM: 4GB 800 MHz DDR2

7200 RPM Drive: FPS = 17, Cycles = 55, Resulting Clip FPS = 21

**10000 RPM Drive: FPS = 30, Cycles = 106, Resulting Clip FPS = 29.42**

SSD Drive: FPS = 11, Cycles = 41, Resulting Clip FPS = 12,26 (!!!!!!!!!!!!)

Now, I have to throw in lots of exclamation points next to the SSD drive. Does anybody have any theories as to why the SSD would be the **slowest of all**??? Is it because reading is super fast, but writing is worse than a regular drive. Or????

[EDIT: search for "ssd drive write speed slower than normal drive" (without quotes.) A lot of entries appear... so it appears some further research on SSD write speed will be necessary.]

But the main point, as you can see, is that with a fast drive, you can do the capture.

I'll get a full report with record and play speeds later. But that's the initial feedback

Best Wishes,

Mark

keftaparty

Hi Mark,

I guess answer is yes, but are you testing all the drives on the same bus ( what kind? )?

What's your SSD ? it should be definetly faster ! Read and write are normally fast.

Would you run a speed test ( blackmagic software ) on each drive ?

Best

Mehdi

simon

Hi Mark

Thanks you for taking the time to test this and fantastic news that it is possible to do the capture. I'll research the SSD issue further...

Best

Simon

simon

Has anyone any experience of using isadora with multiple Blackmagic Intensity Pro cards in a single mac pro? I suspect that Isadora might not recognise them as individual inputs as they are the same model?? The Blackmagic website says this. If it works I was thinking that perhaps buying 4 Blackmagic cards with HD capability might give me more felxibiltiy for future projects than an SD LFG4.

Thanks

Simon

mark

Dear Simon,

Well, I can tell you that the Blackmagic Deck Link Quad shows up as four individual inputs. (I haven't tested four at a time though...) Because this card is essentially four Deck Links in One, I suspect that multiple Black Magic cards will show up as separate devices. But I cannot say with totally confidence without trying it.

Best Wishes,

Mark

simon

Black Magic support emailed the following about multiple Intensity Pro cards in a Mac Pro:

_'I am afraid but we do not certified this software for your kind of workflow - we certified the use of only one card a time per system. However we are aware of people using multiple card within their system, using software like Wirecast, Softrone, BoinxTv. Again, we do not certified them and we can not guarantee that this configuration is going to work as expected.'_

...not much help really so I'm trying to find a supplier that will test it before I buy.

Skulpture

Might be worth contacting Anthony Hammond from jigsaw (UK based) he is currently working on a similar thing and he is aware of isadora and it configurations. He generally has access to blackmagic hardware, macs and Isadora, etc

[http://www.jigsawaudio.com/about/Anthony-Hammond](http://www.jigsawaudio.com/about/Anthony-Hammond)

simon

Thanks Graham I'll try Jigsaw.

mark

Dear Simon,

Thing is, I have the DeckLink Quad, and thus I should be able to try it -- problem is, it only accepts SDI input, which is kind of an unusual beast. What I did try was to capture from the output of the Deck Link back in to one of it's inputs -- that works, no problem. And I can definitely verify that all 4 inputs (and all flavors of those inputs [e.g., NTSC, PAL, HD, etc.]) appear in the Live Capture Settings dialog. What I can't do is try a 4 way simultaneous capture.

But, in theory, you can do it with the Deck Link Quad. And like I said, that likely means separate Deck Link cards as well.

Best Wishes,

Mark

ian

Dear Simon,

To follow-up on Mark's post -- I was able to do some capture tests of 3 streams a few months ago with the same deck link quad card and had somewhat mixed results. With 3 streams I would see a significant number of dropped or duplicated frames, and/or bad artifacts.

I don't have the quad handy currently but I'd be happy to pass my test notes on to Mark in case recent changes in izzy may have helped out with the dropped frame issue.

Best,

Ian