Kinect to izzy

mark

So I'm trying to determine what packages you need to install to get this to work. Basically, the way I did it is to do a bunch of nasty and arcane unix style installs for libusb and OpenNI and others. A wonderful colleague called Andrew Sempere who is working here in Lausanne has a package that installs his Kinect app along with the required libraries and drivers using a normal installer. He offered to modify the installer to just install only the required libraries, and not his app. So I'll work with him to try to get that to happen in the next days. My suspicion is that it worked for Lanz because he had this stuff installed.

If you are really dying to use this, you can bite the bullet and install the packages required by following instructions on the page given below. But let me warn you that I have **no idea** **how to uninstall this stuff** once you've added it to your system. It shouldn't cause any trouble, but please consider that you're installing low level drivers, etc., that have the potential to cause unforeseen problems.

**INSTRUCTIONS:** http://developkinect.com/resource/mac-os-x/install-openni-nite-and-sensorkinect-mac-os-x

**NOTE 1:** You can stop before the step of installing NITE -- as this is not needed.)

**NOTE 2:** when installing libusb-devel, I had to do the following before it would work properly

sudo rm -f /opt/local/lib/libusb-1.0.0.dylib sudo port clean libusb sudo port install libusb +universal

Good luck!

Best Wishes,

Mark

mark

P.S. Why is the dude in the tracking video dressed like a ninja?

vanakaru

Thanks Mark. Following your instructions above I got it running great.

Lanz

using 1.30f26 with the Kinect Depth today continually froze up isadora so i reinstalled 1.3.0f24 and it worked like a dream. not sure why but i thought id mention it.

mickey

Two ore more kinects?

Hi out there!

Did anybody get 2 (ore even more) kinects running to isadora?
No skeltons needed - I would like to get the "ghosts" in better resolution (and a better/broader field of view 1280 by 480) for a panoramic backdrop scene.
Is this possible? would I need 2 pc's/ macmini's?

graceful for every hint!

cheers mickey

AND: HEY I' wish you: The very best year of all !!!

Bill Cottman

Kinect Depth Plugin installed in /library/application support/trokatronix/ isadora plugins. Not showing up in Isadora 1.3.0f26.

Not complaining just feedback :-)

Bill Cottman

Skulpture,

using ni mate v1.12 and izzy 1.3.0f26 and following your tutorial. the izzy stream setup will not auto detect osc values from ni mate. i had this working last March with an earlier version of izzy. any suggestions?? thx.

Skulpture

I will have a look tomorrow for you.

dbini

@mickey - it should be no problem to syphon out ghost video from 2 kinects into izzy - the QC syphon watcher can be assigned to a particular syphon stream.

you can use NImate to create the ghost videos, but i think you need 2 licenses to be able to use 2 kinects.

you can combine the 2 images/videos in Isadora to create your 1280x480, so in theory it should be fine, but i've only got one kinect and therefore one NImate license so i can't check it for you.

john

Skulpture

@vanderzee worked fine for me this morning.... ?

mickey

@dbini
thanks for the message and concern! I'll check out next month (-; holliday s ;-) and keep you informed ..greetz mickey

CraigAlfredson

I'm just wondering if anyone has Mark's Kinect Depth actor working? I can't seem to get it to work.

mark

Dear Craig,

I assume you followed the instructions listed above?

Best Wishes,

Mark

CraigAlfredson

I placed the plug in in the folder listed above. I can't seem to find it anywhere in Izzy. When I type search Kinect nothing comes up...

mark

Dear Craig,

But did you run all the installation instructions about **libusb and OpenNI** from my post in December? You must go through this procedure for the plugin to to work.

Best Wishes,

Mark

CraigAlfredson

I didn't read that far up the post. I am using the QC Kinect patch and it is working fine for depth mask. I assumed the above was to get the Kineme patch working.

Chumcw

Got a Kinect Sensor, downloaded and a bunch of stuff: XCode 4.6, XQuartz, MacPort, CMake, OpenNI-Bin-Dev-MacOSX-v.1.4.5.0, SensorKinect-unstable, NITE-Bin-Dev-MacOSX-v.1.5.2.21. Followed instruction but didn't go pass "sudo port install libtool", nor Mark's "sudo rm -f /opt/local/lib/libusb-1.0.0.dylib" Got "sudo: port: command not found". What can I do?

I see Mark's plugin icon, but nothing to download. Help please. THANK YOU.

Chumcw

HI,

Forgot to put this in my last post: system I am using is
MacBookPro, Mac OS 10.8.2, 2.3 GHz Intel core i7, 8GB 1333MHz, Isadora v.1.3.0f25.

Skulpture

http://troikatronix.com/troikatronixforum/discussion/download/292/Kinect Depth.izzyplug.zip

^ Copy and paste this into your browser @[Chumcw](http://troikatronix.com/troikatronixforum/profile/4750/Chumcw)

mark

Well, I did my install on 10.6.8 -- so I don't know about 10.8, and unfortunately I've got more important "fish to fry" at the moment. I refer everyone to my original post, where I said:

1) If it doesn't work, **you won't complain at all**

** **