Issue with Focusrite Scarlett 6i6
-
Hi there,
We've just bought a Focusrite Scarlett 6i6 to use with Isadora for routing various players on various sound channels. Everything works well except that after a few minutes, Isadora stuck and when we want to change scenes, it active that scene after a while. We use a file with at least 20 scenes. It doesn't do that alway in the same delay, sometime after 5 minutes, sometimes after 10 or 15 mn. Once we unplug the Focusrite, Isadora keep running normaly. I hope I'm clear despite my poor english.
Any idea ?
Thank you !
-
It might be best to open a support ticket, since we will need your system specifications. (Link in my signature)
That said, It sounds like a hardware driver issue, so I would check the manufacturers site for any driver updates.
-
@hatfab said:
Focusrite Scarlett 6i6
Hi, I am using a Focusrite Clarett 8 and although I am not having the same issue as you have described, I am having an issue where the sound suddenly reverts to a noise hum after about 15 minutes or so (unpredictable). I have to restart the focusrite device to rectify the issue. I had thought it may be because of the use of ‘Soundflower’ software to route audio files into Isadora for frequency analysis or a latent fault with the focusrite device. I have been using the Clarett 8 for a few years without any incident. The suspect for my situation is the ‘Soundflower’ software, I think.
If you have a solution for your problem it would be great to have it posted back here.
Best wishes
Bonemap
-
@bonemap thank's for the line of analysis but I don't use Soundflower on my system
-
try to install drivers from here http://beta.focusrite.com/
i got scarlett 18i20 and before this driver I had a lot of problem with this sound card and w10
-
@maximortal Thanks but I'm on Mac.
