Christie DHD800 shutter control
LPmode last edited by LPmode
The info I found here https://community.troikatronix... was not working for me but I modified it so I am successfully able to control my two Christie DHD800 projectors
The projectors are pre PJLink. They use port 10000 to communicate - as per pg 50-51 in the manual https://www.christiedigital.co...
Each time the stream is opened, the password has to be entered. I don't have a password set but I need to send a return message in order to pass the prompt.
0D is the return code. If you have a pin/password enter it(in hex format) before the 0D code. use an online converter https://www.rapidtables.com/co...
ASCII codes are
C00 Power on
C01 Power off
C0D Shutter ON
C0E Shutter OFF
The TCP Send actor takes the codes in Hex format:
43 30 30 Power on
43 30 31 Power off
43 30 44 Shutter ON
43 30 45 Shutter OFF
user actor is below. I can add power on/off if it's helpful