TH2G and QH2G outputting on the same GPU?

[CitizenJoe]

Hi,

I haven't got the hardware to test this myself, yet, but has anyone successfully used a Matrox TH2G and QH2G on a Windows 10 machine, outputting from the same GPU?

The machine spec's are high enough, I think (11900K, 32g, 3060ti)...

The hardware is coming next week, but I'm curious as to others' experiences, tips and tricks?

Thanks!

Cheers,

Hugh

[mark]

@citizenjoe said:

QH2G

 @DusX has has had success with the QuadHead2Go on his high performance laptop. But I'll need him to jump in with his experience.

Best Wishes,
Mark

[CitizenJoe]

@mark 

Thanks Mark. I've used each separately, but never together!

Cheers,

Hugh

[Juriaan]

Hmmm, also curious about the results. I never used two together, I used a TripleHead2Go and an MST Hub on a Windows machine. But that is it..

For multiple outputs like that I normally use a BM Decklink Quad. (8 SDI In / Outputs)

[Kathmandale]

I've used two datapath X4s from the same GPU. And I think I've used an X4 and a TH2G. My only concern would be around confusing the Matrox Power Desk software for setting them up. Might need to configure each one individually then re-boot with both plugged in. I think they're quite dumb (in a good way) until you open up Power Desk to configure.

Let us know how you get on, be good know.