EUROLITE USB-DMX512 PRO Interface MK2

[Konrad]

I have a new EUROLITE USB-DMX512 PRO Interface MK2, it is recognised as a serial interface, but a connected 4 channel RGBW spot cannot be controlled via ISADORA 4. Has anyone already got the same interface to work with ISADORA?

[mark_m]

@Konrad

The interface that we know works with Isadora is the Enntec DMX USB Pro.

I use it with @DusX 's  control which is here:

https://troikatronix.com/add-o... 

Maybe that also works with the EUROLITE interface that you have.

[Konrad]

I have received the information on the protocol used from the manufacturer:

[Konrad]

Protocol for USB DMX 512 Pro Interface MK2

baudrate: 250000

packet format:

1.byte  0x7E  // package header (always 0x7E)
2.byte  0x06  // message type (always 0x06 for sending DMX data)
3.byte  0x##  // DMX startcode + data length LSB (512 channels: 0x01)
4.byte  0x##  // DMX startcode + data length MSB (512 channels: 0x02)
5.byte  0x00  // DMX startcode (always 0x00)
6 to n.byte 0x## // DMX data
n+1.byte 0xE7  // package footer (always 0xE7)

This data packet is to be sent if DMX values have changed. No need to repeat steadily.

[Konrad]

How can I set the baud rate to 250000 in ISADORA?

[Woland]

@konrad

I think Communications > Serial Port Setup > Port # > Speed is what you are looking for, but it looks like the max speed is 230400