Best Codec and preference setting

cristina_spelti

Hi all,

i know this is a trivial question but I hope someone can give me an answer.
I should just use Isadora to simultaneous playback of two movies in two projectors 1024X768.
To get the best picture quality possible (within the 25fps) as Quick Time codec should I use? And what preferences setting?

Thanks for the help

Cristina

Skulpture

It depends on your machines performance/specs really.

A safe bet is MJPEG (Motion JPEG) at 70% Quality.

BUT Isadora can play ProRes quite happily with a little bit of help from a fast drive; ideally a SSD (solid state)

It also depends on the projectors you are using (the hardware projectors) a good projector will upscale your image for you meaning you can use smaller files, but as a good rule of thumb its wise to keep the sizes the same if you can.

Hope this helps for now.

vanakaru

So far Apple PhotoJPG 70-85% has been the recommended one. I have been using Apple Intermediate Codec as well successfully.

If you need transparency(alpha channel) Resolumes DXV codec performs the best.

There has been some good info about preferences recently here. The main thing is to match the frame rate of your media with Target frame rate - or vice versa.

Skulpture

Are Motion JPEG and Photo JPEG very similar performance wise? I've never actually looked into it.

Michel

Whats the difference of Motion JPEG and Photo JPEG?
The web says:
MJPEG codecs compress fields separately and downsample chroma horizontally means they will deliver better quality results from interlaced footage. Photo JPEG does not compress fields separately and downsamples chroma vertically, which can lead to field mush when used with interlaced footage.

So if you use interlaced footage go for Motion JPEG if you use progressiv footage use Photo JPEG, thats the one people have made good experiences when using Isadora.

Best,
Michel

cristina_spelti

Thank you Skulpture and Vanakaru !!

I use Mac Pro 2x2.66 Ghz dual-core intel xeon, with 8Gb system ram, SSD disk, graphic card ATI Radeon X1900XT
and two projectors Sanyo PLC-XF47.

I exported the movie in mjpg and in photojpg (1024X768, 25fps) but simultaneous playback go to 8fps :-(

I attach files with set-up preferences.
What's wrong?

thanks
Cristina

keftaparty

Hi Cristina,

Are you just playing back the movies ? no effects etc ?

With your setup and out of a ssd I think you should even be able to use ProRes.

In any case, the direct playback of two movies of this resolution should run smooth on your computer.

A screenshot of your patch can be nice to help you.

Best

Mehdi

cristina_spelti

Hi Mehdi,
i attach my screenshot patch...

Mille grazie
Crisitna

vanakaru

What is on your General tab in preferences? When I run your patch I get 8fps as well and CPU stay low and VPO is only 85.

However if I run CIMovie Player to CIProjector on two stages I get CPU 85, VPO 30 and 25fps.

cristina_spelti

Hi,
i attach my preference screenshot...
but what is the difference between an actor "normal" and a CI?

thanks
Cri
33faf9-schermata-2012-11-21-a-10.54.44.png

Skulpture

This may shed some light; its an optional upgrade

[http://vjskulpture.wordpress.com/2011/05/02/what-is-isadora-core/](http://vjskulpture.wordpress.com/2011/05/02/what-is-isadora-core/)

And scroll down to 'upgrades' here:

[http://troikatronix.com/support/faq/](http://troikatronix.com/support/faq/)

cristina_spelti

Thanks... i buy and test CI now