KinectV2 OSX
-
Just did some more fixes (finally got hold of a kinect v2), github is not playing nice with the crappy internet here, the repo is up to date, but not the release, ill upload it later tonight with better internet.
-
Can't wait to try this with my Kinect 2. Great thread here
-
Just a note that the release is updated, I have a bit of time and access to a kinect, it would be great if someone ha the time to try it out.
-
Just got a hold of a Kinect v2 and followed Mark's steps listed above. Was up and running in less than a two minutes!
Thank you so much Fred!!!!!!-Alex -
Just a question,
Is the white line that I am seeing in the RGB feed a standard artifact from the Kinect 2?
-
Not for me so far, but I have to say my testing is super limited. I don't have a kinect V2, they have come and gone for a few projects for me. I tested this with 2 laptops and one kinect and I did not see this... The driver for OSX is an experimental 'hack' so it is also not perfect.
-
Hey Guys,
Just a question for the long term.I'm really looking forward working with my new Kinect V2. I got it working on a Windows machine but still a hassle to get it to work with Mac. All these links here look really promising.Although I have a more specifiek question. Does anyone know if there is an app or code to get the heart rate data over OSC ? and maybe some other data then the Syphon stream? Saw the kinect giving me data like state of being, wearing glasses or not, married or not and so forth.Here in the Netherlands every gamer tries to get rid of its Kinect V2 and they go for 50,- euro's nowadays :p but since i'm not a good coder I depend on github and smart people to get it working in my favor...
Cheers!Pépé
-
So far there is no middle ware for OSX capable of decoding the skeleton data or anything other than the video streams provided by the app in this thread. It may happen in the future but I would not rely on it. On windows using the SDK, you can get full access to the higher functions of the camera, there are some solutions for sending skeleton data over OSC. The app in this thread will only send the image streams which is marginally useful, but not life changing.
-
@ Fred
Does that include Ni Mate?https://forum.ni-mate.com/t/os-x-test-build-for-kinect-for-xbox-one-and-kinect-for-xbox-360/586cheersbonemap -
@bonemap there has been some activity on the libfreenect forums on this front (incorporating openNi code to get skeleton data with an updated libfreenect). In the end there may be some kind of fruitful activity, but I doubt it will catch up to the speed and efficiency as well as the large feature set on windows. This post pretty much says it is unstable and un reliable, so yes, here is something, but it does not sound ready for shows.
Who knows it may end up working ok one day, but it has been quite a long time this works perfectly on windows, MS even took the effort to work with the creative communities of Cinder and Openframeworks to create a set of tools for using it on windows.[bonemap](http://troikatronix.com/troikatronixforum/profile/248/bonemap) did you try this? -
Thanks @Fred,
No I haven't tried it. It does not seem to be worth the effort at this point. What are your thoughts on Apple in this area? For example, there was the Apple purchase of PrimeSense some years ago now, but nothing has emerged, except rumours about depth sensors built into future iterations of iPad etc.I don't know if it is worth waiting for Apple Mac to offer development in this arena? Or perhaps it will be the next big launch or new technology for Apple?cheers,bonemap -
I am trying to align the Depth image and the Color image in OF (from Kinect 2).I can't find information on how this alignment should work. I know the color is 1920*1080 and the depth 512*424but scaling the depth upto to the height of the color doesn't align the images. Any knowledge / pointers ? I can get it workably close within Isadora.. but not perfect. -
@DusX Ok, lets go back to some fundamentals, no amount of scaling and quad warping will actually line up 2 cameras, or a camera and a projector. The lenses, sensors and imaging systems will produce differently warped images (no image is not warped) and have different extrinsics, instrinsics and FOV's. The offset is not linear and needs a complicated algorithm to transform between one and the other.
Isadora misses fundamental tools to do this. It can be done through some calibration (like you can see with camera calibration in openCV).Microsoft have of course prepared this transformation in their SDK through the coordinate mapper that is accessible in OF in the windows only addon ofxKinectForWindows2If you are on PC in OF you can see a bit how this works with these functions (this is not the place to go into depth into code so here are the method names)virtual HRESULT STDMETHODCALLTYPE MapCameraPointToDepthSpace(virtual HRESULT STDMETHODCALLTYPE MapCameraPointToColorSpace(You could prepare a mesh, or reconstruct the coordinate mapping and use a shader in the GLSL tools now available in Isadora to achieve this, but first you need to reproduce the coordinate map.I have wanted this kind of intelligent image manipulation in Isadora for a long time, camera calibration, and camera to world/ projector calibration would be a great tool and is something that underlies many questions that come up on the forum- projection on tracked objects... -
Funny, as always.. shortly after writing the previous post I found the coordinate mapper function in the ofxKinectForWindows2 addon (that is what I am working with)I see that nearly what I want to do is already done in the BodyIndexColor example, so I think I can simply port that code with some minor changes (previously I was building from the Base example)Thanks for the info. I had hoped that the images were corrected for alignment upfront (in the kinect hardware before exposing the images). Simply wasn't sure of how the Kinects structure/logic is setup. -
Hi all,
@Fred thanks so much for "KinectV2_Syphon"!
We are testing the app on El Capitan Macbook Pro. Works good. We can't make it work on Yosemite Mac mini though. We tried debugging by unplugging the power chord just like mark recommends and still nothing. Only a black image.
We are wondering if the app does not work on Yosemite?Thanks!
-
Hi, I did not compile the app for Yosemite, I don't have any machines with Yosemite still running. I will see if I get a chance to do it in the coming days and send it.
-
We updated to Sierra since we thought it might be a Yosemite issue. Still showing only a black image on Sierra. Do you recommend plugging the kinect to a PC and run SDK to do the handshake or what are we missing?
thanks
-
Your Mac mini does have usb3 right?
-
It does not have usb3. Only usb2 ports :I
-
The kinect V2 is a USB3.0 device, this is why it does not work. You may be able to use something like this
http://www.sonnettech.com/product/usb3gigethunderboltadapter.htmlif you dont need the thunderbolt port. Warning I have not tested this with the kinect.
