Isadora starts as background process Windows 11

Woland

Can you give us a bit more information on your set up too?

@ray As Eamon said, we'd need more information about your hardware.

Also, if you've been submitting crashes via BugSplat with your name and email, you can start a new ticket using the link in my signature to let us know what name and email you used so we can look up and parse your specific crashes.

DusX

Does Isadora open normally if you detach all externals from your system so you have the bare minimum connected?

Have you installed other software recently? In the past Nahamic Audio drivers caused an issue much like this (this was fixed in version 2). But other software could be causing a conflict.

ray

@woland @DusX

I'm using win 11 with an Nvidia 4090 and Asus Z790 board. My Studio set up has 3 monitors, a TCL tv and 2 Acer monitors.The projectors are 6 Surewheel sw-10 and 2 Optoma (don't know the model number, they're on the ceiling). Have connected the projectors with 2 J5Create usb-C to 4 HDMI adapters. Everything was running smoothly with the first 3 Surewheels. I could turn Izzy on and off and the stages only went to the beamers not the monitors and tv, very stable. Then I accidentally cut the power (!!!!). After that the stages began to go to the tv and monitors, mainly to the tv but sometimes to the monitors also. Izzy starts without any projectors and also with the first 3 Surewheels but the stages are mixed up and I have to manually correct them. Mega hassle! Haven't installed any new programs.

Thanks for all your help, I'm not very adept at the technical side of things...

Here's the file:
dementia-v4.1.3-lite.izz

ray

@woland

Started a new support ticket as you suggested.

DusX

I will look for your support ticket.

In the meantime, On the Windows side, you need to get windows stable. Don't worry about Isadora. First get Windows capable of restarting with all attached displays connected as expected. This may take some detaching/reconnecting and rebooting. Once stable you can move to Isadora.

I would say that its possible that the Isadora Preferences should be reset (menu option in Isadora for this).

And I would also, clear your stage settings and re-create the stages. Just incase that was messed up due to the power outage. Having these stable in Windows first is key.

ray

@dusx

Ok, got windows booting stable with the projectors as you advised but Izzy still won't start with the all the projectors connected. It will start with the 3 monitors and the first 3 projectors.

DusX

@ray said:

with the all the projectors connected

How are you connecting these Displays to the graphics card? Nvidia RTX 4090 supports upto 4x 4K displays. What are you using to get you upto the 8?

mark_m

@DusX

They said they were using 2 x J5Create usb-C to 4 HDMI adapters

https://www.bhphotovideo.com/c...

DusX

@mark_m said:

2 x J5Create usb-C to 4 HDMI adapters

Thanks, I caught this in the support ticket earlier today. I don't see DisplayPort as supported on these, so I am not sure these are connected to the GPU as one might expect. I'll report back once I understand the whole issue via details in the support ticket.

ray

@DusX

The J5create adapters are connected via usb-c ports. On my machine there are 3.

ray

I somehow got Isadora to not crash with all projectors connected. I started switching the cables around and restarting then testing Izzy. Don't know what I did (right or wrong). But I'll take it as a win. If for some reason it acts up again you know I'll be back.

Thanks for all your help. It's really nice to have help when you don't have a clue...

Ray

DusX

@ray said:

Don't know what I did

I would take note of which USB ports you are using, this likely is playing a role. (some USB C ports offer more features than others)