Wearable Inertial motion sensors

[Fred]

You can use a multicast address to broadcast OSC to multiple ips at once. If you are working on the same machine you cannot bind two apps to the same port so you have to code in that you send to 2 separate ports (sending two messages). You can do this with OSCulator.

Check the addressign section of this

http://en.wikipedia.org/wiki/IP_multicast

[crystalhorizon]

same as dbini, doesnt recognize the kinect. I´m on 10.8.4

[eight]

Guys, these are the sources for RAMDanceToolkit+Syphon and CocoKinect for RAMDanceToolkit (could be used for debugging or recompiling for other SDK's).

If CocoKinect does not see kinect:

-- if the app starts, it means that all the libraries (usb and openni) have loaded, and it's up to them to see the kinect;

-- if your kinect is not recognized, please keep in mind that openni version used is for older kinect models (not 1473).

-- if you have an older kinect and program still does not see it, check if an oni file can be played (I have used [these](http://people.cs.pitt.edu/~chang/1635/proj11/kinectRecord) ones for testing).

To see a more detailed output on the console, one can 

   -- open terminal

   -- cd to ../CocoKinect.app/Contents/MacOS

   -- execute ./CocoKinect 

   -- examine the messages

However, if kinect is not recognized, you will see something like "Device not found" –– which is produced by OpenNI library -- not very helpful, but at least it will confirm that the problem is not in CocoKinect, but in openni/libusb/hardware realm.

Lastly, confirm that your kinect is seeing by a regular Openni program, such as NiViewer, to exclude a hardware issue.

--8

[bruper]

@Fred, thanks will investigate, what I would like to do is to send Kinect to CocoKinect and simultaneously to other application to produce sound for instance.... John, I haven't upgraded yet. With 10.6.8 I get intermittent visuals on Syphon... anybody experiencing the same with upgraded OS?

[dbini]

hey @eight: here's what's happening: CocoKinect opens and runs ok, asks to plug in kinect or drop *.oni file.

my kinect is of the older variety. it works fine with NI-Mate, so its not a hardware issue.

CocoKinect won't recognise when i've plugged in my kinect and reset, or if i drop an oni file from the resource you linked to.

[eight]

@dbini I found a spare mac and was able to reproduce what you are seeing: NiMate runs, CocoKinect don't. This is a pristine (in relation to OpenNi) computer, while my other ones have had openni and NITE installed numerous times. Unfortunately, this is where I have to stop: I have another project pressing. Bottom line: try to install Openni, SensorKinect and NITE if your version of CocoKinect does not render. I read somewhere on the Openni Forums that openni will silently try to load the libraries, and if it can't find them, it will simply bail out without giving the reason.

--8

[dbini]

cheers @eight, thanks for all your help. i'll let you know if i get it to work, otherwise i'll wait for something else to turn up. i know the guys at Delicode are looking into integrating support for RAM into a future release of NI Mate.

[Fred]

There is an openniOSC app included with the ram dance toolkit, it is calibration pose free and works very well- is there something that your cocoa app does extra- the OpenNIOSC does not already do?

[bruper]

anybody else is experiencing intermittent video in RAM-Dance-Syphon?? (in all the Mac OS's)

[Fred]

Here is something I made today for a few experiments, OSC protocol to fit with ram system and syphon out of Colour,  Depth, Mask and PointCloud (last 2 are for active tracked users only) There is a 10.6 and 10.8 version (I have no 10.6 to test really but it works compiled for 10.6 on my 10.8 machine.

10.6 version http://goo.gl/Siyal

10.8 version http://goo.gl/GnFFh

WIll be up in 10 mins

Fred

[bruper]

@Fred thanks, is working fine on 10.6.8 except for the Syphon intermittent problem with the various modalities of RAM Dance  (+ Syphon)...

[Fred]

I have not tried or checked the code of RAM Dance  (+ Syphon), these were for something else, a few experiments today- saw some were having trouble with cocoa kinect and I had this going anyway- a skeleton and image server for the kinect-it is self contained no drivers needed that is all. Should work with new and old kinects (I only have old but the libraries apparently are good for both).

[bruper]

one more approach with download link from my friend Grifu
http://www.grifu.com/vm/?cat=20

[bruper]

With 10.7.5 still  getting intermittent visuals on Syphon... anybody experiencing the same with 10.8?

[crystalhorizon]

@eight

With the new update from NI Mate you are able to record oni files. I tried to drag an oni file into the coco kinect window, but its not showing up. Any ideas? 

Alex

[eight]

@feinsinn:

Please share the oni file, I'll check.

--8

[crystalhorizon]

@eight

Cool, thank you. Link to the file: https://www.dropbox.com/s/vne34217gkvrjq6/NI_mate_2013-12-17_08-26-18.oni.zip

[eight]

@feinsinn I am traveling right now: tried to download it but it takes too long in a cafe I sit. I will try again, once I have a good connection.

--8

[crystalhorizon]

@eight thank you for your engagement! All the best, Alex

[eight]

@feinsinn: Sorry it took me this long. I am finally home and was able to check your file –– dragged it on the CocoKinect app and it worked! OSX 10.9.1, MBPr.

Just in case I attach the executable.

Best regards,

--8

efe5b8-cocokinect.app.zip