Solved,

I was using the 9.7 version and the 9.7.1 finally appears in Isadora. Image is great! Thanks.

yes, I see a CalDigit dock with TB loop through and HDMI out has been announced... $199, "coming soon". I'm sure more will follow... and cheaper. @Mark, you're right, the new Macbooks are all kind of I/O crippled, especially also since the demise of the expresscard slot. Not at all built for mad tinkerers!

A good (not cheap) CAT5/6 extender is just as good as running via a long cable or using a booster. I've used/seen extenders from Gefen and others on some of the biggest projects around.

Encouraging to hear that it works for you. I'll try reloading the drivers but I am using 9.7.1 and see if it makes like better.

I have changed the system preferences before selecting the input in Isadora but I have only had a positive result with HDMI. I know the camera & cable are working because I can get the composite feed into Isadora with my old Grassvalley ADVC 55 box.

Dear Eyesoar,

Does any other third-party (i.e,. not BlackMagic) software that shows the 1080p30 input? E.g., QuickTime Player X when attempting to record?? Best Wishes, Mark

The funding was unsuccessful so I don't know what will happen now.

I've not seen the intel camera nick. Will check it out now.

It will come.. and it won't take long.

Thanks DusX.  Really, it was the re-seating of the Display Port-to-VGA adapters coming out of the Triple Head DP that made it work. Will test tomorrow if it remains solid when I boot up again.  :0

thank you

Mehdi has reported the same problem with the TH2Go. It may be related to the issue we're discussing in this thread. I'll make sure to make the TH2Go part of my examination of this topic.

-- Mark

Dear Mark,

Thank you for you answer. It worked perfectly.  Best wishes, Renato

Wow these are cheap... would be interested to know if it works on Mac!

Not directly Isadora, but imagine there will be some interest in it here

Owl programmable audio effects pedal is doing well on Kickstarter at the moment http://www.kickstarter.com/projects/marser/owl-programmable-effects-pedal

I've used the cyberpaks before, but not with Isadora. I don't think that there's a way to limit the output on board the unit.

Try this, http://www.ebay.com.au/itm/HD-SDI-1080P-Full-HD-Box-Camera-2-Megapixel-1-3-CMOS-Image-sensor-/281010620283 it has manual settings, is IR ready and easy to mount. You can get very cheap ultr wide lenses for it and it also does HDSDI OR Composite over BNC, much better than a camcorder with locking BNC connections and it never turns off. With a 150 dollar black magic capture you can get low latency SD OR HDSDI. I have used a few of these and they are perfect for tracking. If you are clever you can also remote the settings but I did this with OF not Izzy. Use a lens calculator to see what you need to use to get the width you need from the right distance. Grab a an IR Lamp and you can do all the tricks from mortal engine (although Izzzy might not pull them off). With all this your are still about the same price as the camera mod and you have some pro (ISH) gear. Best of luck

I was quite surprised, HDMI implies video standards only so Sd or HD. However it functions more like a DVI port- pretty handy. I never used it, just plugged it in as it was lying around and was surprised to see it register 2 full outputs.

Can anyone recommend a decent webcam to use on a Mac with Izzy - I want to get a number of them for my students?
needless to say it needs to be:

inexpensive easy to get hold of have manual control over exposure, shutter and possibly focus have OSX drivers
thanks!

I have used motion builder a little but not had these problems- is it a problem from the data stream from Organic Motion?

Well as all know (MatthewH especially) the kinect sensors are designed for living rooms/bedroom use. Not dance halls and theatre spaces - thats the main problem.

Does anyone want to buy 4 xbee s1 units, prefereably in the Netherlands I have a surplus pm me if you are interested.