@jan-luis said:

USB microphones could you recommend that you tested with Isadora? Also wireless microphones, if there are those running through a usb connection.

There are so many cheap varieties of usb mic’s, including the headset variety. In my experience I have had unreliable performance from these because the build quality is low and many have simply fallen apart. 

I have used an Avid Mbox mini as a usb audio interface and have found it to be a robust piece of equipment with good quality IO for one or two microphones. Because it has standard xlr cable ports with phantom power, many microphones are compatible, including wireless lavaliere sets.

The Mbox is a portable form factor however, it would be interesting to look into other quality audio interfaces available in a small box with a reasonable price tag.

Regards

Bonemap 

@skulpture

But I would definitely be interested to hear any thoughts you'd like to share on using TVs; either in installations or not. I'm always looking to learn as much as I can. Every bit of information is helpful at some point, even if it's for a future project. :)

@dbini - ofcourse! I must try it out. Many thanks for the suggestion. 

Hi, @Fred  , I totally agree with you about the MST Hubs.

I was pointing the Datapath solution as I find it being the most "comfortable one ", even if it's of course more expensive.

I have been talking with @maiami about this project before she posted the question here. They will need to run long SDI cables to the beamers etc...

I find the Datapath solution nice because you get direct SDI outputs, that you can mirror easily to control screens, no adapters, no extra converters etc... Also as the solution needs to be " touring ready ", the datapath is ready to be rack mounted.

Best

Mehdi

@arielwn : Hello, I'm on the same researches, so, how did it go for you finally?

@fubbi said:

My supplier makes me whatever chipset at whatever pitch and length I want and I am sure she would make the same for you.

Perfect!

Bonemap  

@mark said:

verify that they are having a problem with the C270 on Mac OS X?”

I can verify that there is inconsistent and unexpected behavior using my Logitech c930e webcam similar to what has been posted previously by @Woland and others “ n the Live Capture Settings, when we went to select the Logitech C920, we sometimes wouldn't get a feed and it would show up as "disabled". I can’t recreate this behavior each time, but the last occurrence happened during a setup for a gallery installation that also used usb for communicating with other devices such as an Arduino. And where a usb hub was also connected to the computer (but not the same port as the camera), this was using an older usb2 Mac book pro 2012.

I have not seen the issue on a later usb3 MacBook Pro, except for having to relaunch the application before it will find the camera connection.

Best wishes 

Bonemap 

@craigw

I found the sierra update generally slowed my mac to 1/2.

Are other operations running as expected. 

@craigalfredson I would very much be interested in your process/tutorial and actors you use.

@fred

Thanks much for the feedback. Since I've only worked on Macs at this point I haven't given any thought to Kinect v2 but will definitely look into Ryan Webber's solution and test it and the v2 out.  The only other thing I've been rolling over has to do with sound and whether I need a separate sound card. I have a colleague who is into large audio installations who works with a Universal Audio Apollo 8 and a less expensive unit from them. His thoughts are that if we're moving into high-end audio that the station should be a separate one and that I can probably get by with a USB based mic interface. Your thoughts?

Here a complete description about this camera

https://software.intel.com/sit...

@fred I am interested too! At least one.

@kurtmeadows in general I would avoid using this method, unless you really need a feature from that pathway (like dual link 444 SDI). Also yes this is limited to a single output. The Blackmagic cards have no processing capability, it will waste a lot of resources to go back and forth from the GPU (where your image is calculated), back to the CPU and out the Blackmagic output.

It seems your need is only monitoring what you output to the projectors, this can be done inside Isadora, or by splitting the output signals, or using a multiview monitor. I would go for adding an extra monitor to you gfx card and asking yourself a split screen preview of everything you need to see. Just use normal HDMI to SDI for your output (even Blackmagic sell these do 50 bucks these days). This way is less cabling and less work for your computer as well as only requiring a single screen for preview monitoring.

@gomer_pyle yes you can but you need to use the outside 2 connectors! then only 2 monitors show up!

@mark said:

@dillthekraut said:

By the way, is the 'Stage sharing' function still on the Roadmap?

 Yes. ;-) But that's totally different than Texture Sharing, just to be clear.

 Ok, great! But you want to tell me, this won't help me with the multiple GPU problem!? I think, I got that ;-).

@lauri So far there is no chance for thuinderbolt, you will havew to go with USB3.0 or PCIe capture.

The trashcans have a serious thermal design flaw and all GPUs are underclocked to compensate, if yours has a problem with a lot of pushing apple will replace the cards (gltiches on intense renders etc)

@sebastiaan said:

it worked with the four projectors

Hi Sebastiaan,

Thanks for the information can you confirm that you had 4 x HD 1920 x 1080? also can you advise what Hz the displays were running at?

much appreciated.

best wishes

bonemap

+1 for Philippe's technique. a sound card like the Edirol FA101 has 10 channels out and is plug and play, wired into IEM transmitters will give a stable setup. Those Sennheiser receivers are solid. I'd recommend Minirig for the amp/speakers - they have the best sound quality/loudness/battery life/footprint ratio I have found yet. (Simon McBurney uses this setup during Complicité's The Encounter)

Thanks a lot Mark!

Maybe this is an interesting project regarding compact systems.

https://www.pcper.com/news/Sys...